Photothermal Actuation of Thick 3D‐Printed Liquid Crystalline Elastomer Nanocomposites
Advanced Materials · 2024-08 · 36 (34)
DOI: 10.1002/adma.202313745 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.03.2024. Verfasst von Nathaniel P Skillin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, University of Colorado Boulder, Boulder, CO, 80303, USA. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: NIH HHS, NHLBI NIH HHS, Air Force Office of Scientific Research.
Abstract (Originalsprache)
Liquid crystalline elastomers (LCEs) are stimuli‐responsive materials that transduce an input energy into a mechanical response. LCE composites prepared with photothermal agents, such as nanoinclusions, are a means to realize wireless, remote, and local control of deformation with light. Amongst photothermal agents, gold nanorods (AuNRs) are highly efficient converters when the irradiation wavelength matches the longitudinal surface plasmon resonance (LSPR) of the AuNRs. However, AuNR aggregation broadens the LSPR which also reduces photothermal efficiency. Here, the surface chemistry of AuNRs is engineered via a well‐controlled two‐step ligand exchange with a monofunctional poly(ethylene glycol) (PEG) thiol that greatly improves the dispersion of AuNRs in LCEs. Accordingly, LCE‐AuNR nanocomposites with very low PEG‐AuNR content (0.01 wt%) prepared by 3D printing are shown to be highly efficient photothermal actuators with rapid response (>60% strain s −1 ) upon irradiation with near‐infrared (NIR; 808 nm) light. Because of the excellent dispersion of PEG‐AuNR within the LCE, unabsorbed NIR light transmits through the nanocomposites and can actuate a series of samples. Further, the dispersion also allows for the optical deformation of millimeter‐thick 3D printed structures without sacrificing actuation speed. The realization of well‐dispersed nanoinclusions to maximize the stimulus‐response of LCEs can benefit functional implementation in soft robotics or medical devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biological Engineering, University of Colorado Boulder, Boulder, CO, 80303, USA.
- The BioFrontiers Institute, University of Colorado Boulder, Boulder, CO, 80303, USA.
- Medical Scientist Training Program, School of Medicine, University of Colorado Anschutz Medical Campus, Aurora, CO, 80045, USA.
- Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson AFB, Dayton, OH, 45433, USA.
- UES, Inc., Dayton, OH, 45433, USA.
- Materials Science and Engineering Program, University of Colorado Boulder, Boulder, CO, 80303, USA.
ORCID-Profile: Timothy J White
Förderung
- NIH HHS
- NHLBI NIH HHS
- Air Force Office of Scientific Research
- NIDCR NIH HHS
- DARPA
- National Institutes of Health
- Defense Advanced Research Projects Agency
Zitieren
APA
Skillin, N. P., Bauman, G. E., Kirkpatrick, B. E., McCracken, J. M., Park, K., Vaia, R. A., Anseth, K. S., & White, T. J. (2024). Photothermal Actuation of Thick 3D‐Printed Liquid Crystalline Elastomer Nanocomposites. Advanced Materials, 36(34). https://doi.org/10.1002/adma.202313745
Vancouver
Skillin NP, Bauman GE, Kirkpatrick BE, McCracken JM, Park K, Vaia RA, et al. Photothermal Actuation of Thick 3D‐Printed Liquid Crystalline Elastomer Nanocomposites. Advanced Materials. 2024;36(34). doi:10.1002/adma.202313745
BibTeX
@article{Skillin2024,
author = {Skillin, Nathaniel P and Bauman, Grant E and Kirkpatrick, Bruce E and McCracken, Joselle M and Park, Kyoungweon and Vaia, Richard A and Anseth, Kristi S and White, Timothy J},
title = {Photothermal Actuation of Thick 3D‐Printed Liquid Crystalline Elastomer Nanocomposites},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {34},
doi = {10.1002/adma.202313745}
}
EUVIMED