EUVIMEDEUVIMED entdecken
Crossref

Cost‐Effective Symmetric PbSe‐Based Device for Thermoelectric Cooling

Liqing Xu, Tao Hong, Shibo Liu, Sining Wang, Dongrui Liu, Tianhang Zhou, Yu Xiao, Li-Dong Zhao iD

Advanced Materials · 2025-07 · 37 (27)

DOI: 10.1002/adma.202502705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.04.2025. Verfasst von Liqing Xu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Natural Science Foundation of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoelectric cooling technology has broad applications but is limited by the high cost of tellurium (Te) in commercially available Bi 2 Te 3 ‐based thermoelectric materials. Herein, a cost‐effective symmetric PbSe‐based device constructed from 7 pairs of Pb 0.988 Cu 0.002 Se (p‐type) and Pb 1.02 Cu 0.002 Se (n‐type) is presented, which demonstrates impressive cooling temperature difference (Δ T C ) of 32.8 and 41.0 K with the hot side maintained at 303 and 343 K, respectively. This low‐cost symmetric PbSe‐based device exhibits superior cost‐effectiveness (Δ T /cost) for near‐room‐temperature thermoelectric cooling compared to other Bi 2 Te 3 ‐based devices. Its high cooling performance primarily stems from an advanced carrier and phonon transport properties in p‐type Pb 0.988 Cu 0.002 Se. Specifically, Pb vacancy and Cu substitution in Pb 0.988 Cu 0.002 Se act as strong p‐type dopants that effectively optimize carrier density, resulting in a maximum power factor of 28.69 µW cm −1 K −2 at room temperature. Moreover, the mobile Cu atoms within the lattice significantly impede phonon propagation, leading to a low room‐temperature lattice thermal conductivity of 1.10 W m −1 K −1 . Finally, the room‐temperature figure of merit ( ZT ) and average ZT value in p‐type Pb 0.988 Cu 0.002 Se can reach 0.6 and 0.68 at 300–573 K, surpassing previous p‐type PbSe‐based polycrystals. This work emphasizes the significant potential of a cost‐effective PbSe compound for near‐room‐temperature cooling applications.

Schlagwörter

Stichwörter der Autor:innen

cooling temperaturecost‐effective PbSepower factorthermal conductivitythermoelectric cooling

Autor:innen und Institutionen

  • School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China.
  • School of Materials Science and Engineering, Beihang University, Beijing, 100191, China.
  • College of Carbon Neutrality Future Technology, State Key Laboratory of Heavy Oil, Processing, China University of Petroleum (Beijing), Beijing, 102249, China.

ORCID-Profile: Li-Dong Zhao

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Natural Science Foundation of Sichuan Province
  • Outstanding Young Scholars Foundation of China University of Petroleum

Zitieren

APA

Xu, L., Hong, T., Liu, S., Wang, S., Liu, D., Zhou, T., Xiao, Y., & Zhao, L. D. (2025). Cost‐Effective Symmetric PbSe‐Based Device for Thermoelectric Cooling. Advanced Materials, 37(27). https://doi.org/10.1002/adma.202502705

Vancouver

Xu L, Hong T, Liu S, Wang S, Liu D, Zhou T, et al. Cost‐Effective Symmetric PbSe‐Based Device for Thermoelectric Cooling. Advanced Materials. 2025;37(27). doi:10.1002/adma.202502705

BibTeX
@article{Xu2025,
  author = {Xu, Liqing and Hong, Tao and Liu, Shibo and Wang, Sining and Liu, Dongrui and Zhou, Tianhang and Xiao, Yu and Zhao, Li-Dong},
  title = {Cost‐Effective Symmetric PbSe‐Based Device for Thermoelectric Cooling},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {27},
  doi = {10.1002/adma.202502705}
}
Kostenlos starten →