EUVIMEDEUVIMED entdecken
Crossref

Enhanced Near‐Room‐Temperature Thermoelectric Properties of n‐Type PbSe and Cooling Device via Modulation Doping

Jing Zhou, Yongjia Zhang, Yilun Wu, Zixuan Chen, Pengju Han, Yunpeng Zheng, Hongwei Ming, Jianghe Feng, Zhong‐Zhen Luo, Zhigang Zou

Advanced Functional Materials · 2026-04 · 36 (28)

DOI: 10.1002/adfm.202524839 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 02.12.2025. Verfasst von Jing Zhou und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Fujian Province, Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, PbSe has made significant progress in thermoelectric refrigeration. However, the optimization of the thermoelectric performance of polycrystalline PbSe is mostly concentrated at medium and high temperatures. Limited by the long growth cycle and poor mechanical processing strength of single crystals, it is extremely urgent to optimize the room‐temperature thermoelectric properties of polycrystalline PbSe. Here, the room‐temperature performance of polycrystalline n‐type PbSe‐based thermoelectric materials is optimized through the modulation doping strategy. The modulation doping strategy enhances the electrical conductivity by increasing the carrier mobility while maintaining a large Seebeck coefficient. The modulation doping is applied by incorporating high carrier concentration Pb 0.99875 (GaSb) 0.00125 Se into pristine PbSe. As a result, the n‐type polycrystalline [PbSe] 0.9 [Pb 0.99875 (GaSb) 0.00125 Se] 0.1 exhibits a high power factor of ∼34 µW cm −1 K −2 and a large dimensionless figure of merit of ∼0.6 at 300 K. Based on this, 18 pairs of thermoelectric cooling devices are fabricated using n‐type [PbSe] 0.9 [Pb 0.99875 (GaSb) 0.00125 Se] 0.1 and commercial p‐type Bi 0.5 Sb 1.5 Te 3 . The maximum cooling temperature difference of 45 K is obtained with a current of 2 A and the hot side temperature of 363 K. These findings have laid a solid foundation for promoting the application of polycrystalline PbSe materials in the field of thermoelectric cooling.

Förderung

  • National Key Research and Development Program of China
  • Natural Science Foundation of Fujian Province
  • Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhou, J., Zhang, Y., Wu, Y., Chen, Z., Han, P., Zheng, Y., Ming, H., Feng, J., Luo, Z., & Zou, Z. (2026). Enhanced Near‐Room‐Temperature Thermoelectric Properties of n‐Type PbSe and Cooling Device via Modulation Doping. Advanced Functional Materials, 36(28). https://doi.org/10.1002/adfm.202524839

Vancouver

Zhou J, Zhang Y, Wu Y, Chen Z, Han P, Zheng Y, et al. Enhanced Near‐Room‐Temperature Thermoelectric Properties of n‐Type PbSe and Cooling Device via Modulation Doping. Advanced Functional Materials. 2026;36(28). doi:10.1002/adfm.202524839

BibTeX
@article{Zhou2026,
  author = {Zhou, Jing and Zhang, Yongjia and Wu, Yilun and Chen, Zixuan and Han, Pengju and Zheng, Yunpeng and Ming, Hongwei and Feng, Jianghe and Luo, Zhong‐Zhen and Zou, Zhigang},
  title = {Enhanced Near‐Room‐Temperature Thermoelectric Properties of n‐Type PbSe and Cooling Device via Modulation Doping},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {28},
  doi = {10.1002/adfm.202524839}
}
Kostenlos starten →