EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Full Wafer Scale Manufacturing of Directly Printed TiO 2 Metalenses at Visible Wavelengths with Outstanding Focusing Efficiencies

Dae Eon Jung iD, Vincent J Einck iD, Alex Dawicki, Victor Malgras iD, Lucas D Verrastro, David Grosso iD, Amir Arbabi, James J Watkins iD

Advanced Materials · 2025-07 · 37 (30)

DOI: 10.1002/adma.202500327 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 08.05.2025. Verfasst von Dae Eon Jung und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Science and Engineering, University of Massachusetts, Amherst, MA, 01003, USA. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: NSF Center for Hierarchical Manufacturing at the University of Massachusetts, Army Research Laboratory, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highly efficient metalens arrays designed for 550 nm are directly printed using UV‐assisted nanoimprint lithography (UV‐NIL) and a TiO 2 nanoparticle (NP)‐based ink on 8″ optical wafers with imprint times less than 5 min. Approximately one‐thousand 4‐mm metalenses are fabricated per wafer with uniform optical performance using a reusable PDMS‐based elastomeric stamp. The absolute and relative focusing efficiencies are as high as 81.2% and 90.4%, respectively, matching closely with the simulated maximum efficiencies of 83% and 91% achievable with the given master design, indicating that future improvements are possible, and efficiencies are not limited by materials or process. The imprinted metalenses are free from organics due to a post‐imprint calcination step and exhibit outstanding dimensional and optical stabilities. The highest efficiencies are attained using imprint formulations comprised of mixtures of 10 and 20 nm TiO 2 NPs, whose denser packing not only increases the refractive index (RI) of the calcined lenses up to 2.0 but also reduces the feature shrinkage relative to the master. 25 cycles of atomic layer deposition of TiO 2 following imprinting increase the RI up to 2.3 without changing dimensions by uniform gap filling between NPs. This work opens a path for true, full‐scale additive manufacturing of metaoptics.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingatomic layer depositionmetasurfacenanoimprint lithographyparticle packing

Autor:innen und Institutionen

  • Department of Polymer Science and Engineering, University of Massachusetts, Amherst, MA, 01003, USA.
  • Myrias Optics, Inc., 240 Thatcher Road S571, Amherst, MA, 01003, USA.
  • Aix Marseille Université, CNRS, CINAM, Marseille, 13288, France.
  • Department of Electrical and Computer Engineering, University of Massachusetts, Amherst, MA, 01003, USA.

ORCID-Profile: Dae Eon Jung, Vincent J Einck, Victor Malgras, David Grosso, James J Watkins

Förderung

  • NSF Center for Hierarchical Manufacturing at the University of Massachusetts
  • Army Research Laboratory
  • National Science Foundation

Zitieren

APA

Jung, D. E., Einck, V. J., Dawicki, A., Malgras, V., Verrastro, L. D., Grosso, D., Arbabi, A., & Watkins, J. J. (2025). Full Wafer Scale Manufacturing of Directly Printed TiO 2 Metalenses at Visible Wavelengths with Outstanding Focusing Efficiencies. Advanced Materials, 37(30). https://doi.org/10.1002/adma.202500327

Vancouver

Jung DE, Einck VJ, Dawicki A, Malgras V, Verrastro LD, Grosso D, et al. Full Wafer Scale Manufacturing of Directly Printed TiO 2 Metalenses at Visible Wavelengths with Outstanding Focusing Efficiencies. Advanced Materials. 2025;37(30). doi:10.1002/adma.202500327

BibTeX
@article{Jung2025,
  author = {Jung, Dae Eon and Einck, Vincent J and Dawicki, Alex and Malgras, Victor and Verrastro, Lucas D and Grosso, David and Arbabi, Amir and Watkins, James J},
  title = {Full Wafer Scale Manufacturing of Directly Printed TiO 2 Metalenses at Visible Wavelengths with Outstanding Focusing Efficiencies},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {30},
  doi = {10.1002/adma.202500327}
}
Kostenlos starten →