Visible Metalenses with High Focusing Efficiency Fabricated Using Nanoimprint Lithography
Advanced Optical Materials · 2024-03 · 12 (9)
DOI: 10.1002/adom.202301865 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 21.12.2023. Verfasst von Andrew McClung und 4 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Science Foundation, Defense Sciences Office, DARPA.
Abstract (Originalsprache)
Metasurfaces enable precise control over the properties of light and hold promise for commercial applications. However, fabricating visible metasurfaces suitable for high‐volume production is challenging and requires scalable processes. Nanoimprint lithography is a cost‐effective and high‐throughput technique that can meet this scalability requirement. This work presents a mask‐templating nanoimprint lithography process for fabricating metasurfaces with varying fill factors and negligible wavefront aberrations using composite stamps. As a proof‐of‐concept, a 6 mm diameter metalens formed of silicon nitride nano‐posts with a numerical aperture of 0.2 that operates at 550 nm is demonstrated. The nanoimprinted metalens achieves a peak focusing efficiency of (81 ± 1)%, comparable to the control metalens made with electron beam lithography with a focusing efficiency of (89 ± 1)%. Spatially resolved deflection efficiency and wavefront data, which informs design and process optimization, is also presented. These results highlight nanoimprint lithography as a cost‐effective, scalable method for visible metasurface fabrication that has potential for widespread adoption in consumer electronics and imaging systems.
Förderung
- National Science Foundation
- Defense Sciences Office, DARPA
Zitieren
APA
McClung, A., Torfeh, M., Einck, V. J., Watkins, J. J., & Arbabi, A. (2024). Visible Metalenses with High Focusing Efficiency Fabricated Using Nanoimprint Lithography. Advanced Optical Materials, 12(9). https://doi.org/10.1002/adom.202301865
Vancouver
McClung A, Torfeh M, Einck VJ, Watkins JJ, Arbabi A. Visible Metalenses with High Focusing Efficiency Fabricated Using Nanoimprint Lithography. Advanced Optical Materials. 2024;12(9). doi:10.1002/adom.202301865
BibTeX
@article{McClung2024,
author = {McClung, Andrew and Torfeh, Mahsa and Einck, Vincent J. and Watkins, James J. and Arbabi, Amir},
title = {Visible Metalenses with High Focusing Efficiency Fabricated Using Nanoimprint Lithography},
journal = {Advanced Optical Materials},
year = {2024},
volume = {12},
number = {9},
doi = {10.1002/adom.202301865}
}
EUVIMED