Solid Polymer Electrolytes for All‐Solid‐State Lithium–Sulfur Batteries: Different Designs Dependent on Their Interaction with Sulfur Cathodes
Advanced Materials · 2025-06 · 37 (24)
DOI: 10.1002/adma.202415864 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 14.04.2025. Verfasst von Junke Shao und 7 weiteren Autor:innen. Beteiligte Einrichtung: Country State Center for International Cooperation on Designer Low-Carbon & Environmental Materials, School of Materials Science and Engineering, Zhe…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 238 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fellowship of China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Nonflammable and flexible solid polymer electrolytes (SPEs) are widely studied to improve the safety of lithium–sulfur batteries (LSBs). Studies on SPE‐based LSBs primarily focus on addressing issues stemming from poor SPE properties, Li dendrites, and “shuttle effect” of polysulfides. Currently, strategies from SPE‐based lithium batteries (without sulfur cathodes) and liquid electrolyte (LE)‐based LSBs (without SPEs) are the most commonly employed approaches to tackle above issues. These strategies are designed without taking into account the problems caused by the coexistence of SPEs and sulfur cathodes, resulting in SPE‐based LSBs exhibiting significantly inferior performance than liquid‐electrolyte‐based LSBs. Therefore, the strategies for SPE‐based LSBs necessitate different designs. However, no reviews have focused on the aforementioned differences and analyzing their corresponding causes thus far, which is unfavorable for the development of this field. Herein, the emerging advances in SPE‐based LSBs are comprehensively reviewed. In particular, for the first time, the different designs and their corresponding causes are comprehensively discussed. These causes include the high adsorption strength of SPEs with polysulfides, corrosion of polysulfides to barrier layers, deterioration of the ionic conductivity of SPEs, and defective interfaces between cathodes and SPEs. Finally, several pressing challenges and future prospects for the field are discussed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Country State Center for International Cooperation on Designer Low-Carbon & Environmental Materials, School of Materials Science and Engineering, Zhengzhou University, 100 Kexue Avenue, Zhengzhou, 450001, P. R. China.
- Green Catalysis Center, College of Chemistry, Zhengzhou University, Zhengzhou, 450001, P. R. China.
- School of Chemistry, Chemical Engineering and Life Science, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, P. R. China.
ORCID-Profile: Jinping Liu
Förderung
- National Natural Science Foundation of China
- Fellowship of China Postdoctoral Science Foundation
Zitieren
APA
Shao, J., Li, Y., Guo, J., Duan, J., Liang, H., Dou, Y., Lu, S., & Liu, J. (2025). Solid Polymer Electrolytes for All‐Solid‐State Lithium–Sulfur Batteries: Different Designs Dependent on Their Interaction with Sulfur Cathodes. Advanced Materials, 37(24). https://doi.org/10.1002/adma.202415864
Vancouver
Shao J, Li Y, Guo J, Duan J, Liang H, Dou Y, et al. Solid Polymer Electrolytes for All‐Solid‐State Lithium–Sulfur Batteries: Different Designs Dependent on Their Interaction with Sulfur Cathodes. Advanced Materials. 2025;37(24). doi:10.1002/adma.202415864
BibTeX
@article{Shao2025,
author = {Shao, Junke and Li, Yiyang and Guo, Junling and Duan, Jiaozi and Liang, Huan and Dou, Ying and Lu, Siyu and Liu, Jinping},
title = {Solid Polymer Electrolytes for All‐Solid‐State Lithium–Sulfur Batteries: Different Designs Dependent on Their Interaction with Sulfur Cathodes},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {24},
doi = {10.1002/adma.202415864}
}
EUVIMED