Consistent Thermal Conductivities of Spring‐Like Structured Polydimethylsiloxane Composites under Large Deformation
Advanced Materials · 2024-09 · 36 (39)
DOI: 10.1002/adma.202404648 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 06.07.2024. Verfasst von Yongqiang Guo und 9 weiteren Autor:innen. Beteiligte Einrichtung: Shaanxi Key Laboratory of Macromolecular Science and Technology, School of Chemistry and Chemical Engineering, Northwestern Polytechnical University,…. Die Arbeit wurde bisher 137-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: Technological Base Scientific Research Projects, National Scientific Research Project, Shaanxi Province Key Research and Development Plan Project.
Abstract (Originalsprache)
Flexible and highly thermally conductive materials with consistent thermal conductivity ( λ ) during large deformation are urgently required to address the heat accumulation in flexible electronics. In this study, spring‐like thermal conduction pathways of silver nanowire (S‐AgNW) fabricated by 3D printing are compounded with polydimethylsiloxane (PDMS) to prepare S‐AgNW/PDMS composites with excellent and consistent λ during deformation. The S‐AgNW/PDMS composites exhibit a λ of 7.63 W m −1 K −1 at an AgNW amount of 20 vol%, which is ≈42 times that of PDMS (0.18 W m −1 K −1 ) and higher than that of AgNW/PDMS composites with the same amount and random dispersion of AgNW (R‐AgNW/PDMS) (5.37 W m −1 K −1 ). Variations in the λ of 20 vol% S‐AgNW/PDMS composites are less than 2% under a deformation of 200% elongation, 50% compression, or 180° bending, which benefits from the large deformation characteristics of S‐AgNW. The heat‐transfer coefficient (0.29 W cm −2 K −1 ) of 20 vol% S‐AgNW/PDMS composites is ≈1.3 times that of the 20 vol% R‐AgNW/PDMS composites, which reduces the temperature of a full‐stressed central processing unit by 6.8 °C compared to that using the 20 vol% R‐AgNW/PDMS composites as a thermally conductive material in the central processing unit.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shaanxi Key Laboratory of Macromolecular Science and Technology, School of Chemistry and Chemical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, 710072, P. R. China.
- School of Chemistry, Beihang University, Beijing, 100191, P. R. China.
ORCID-Profile: Junwei Gu
Förderung
- Technological Base Scientific Research Projects
- National Scientific Research Project
- Shaanxi Province Key Research and Development Plan Project
- Innovation Capability Support Program of Shaanxi
- Natural Science Foundation of Chongqing
- Fundamental Research Funds for the Central Universities
- Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University
- Natural Science Basic Research Program of Shaanxi Province
Zitieren
APA
Guo, Y., Wang, S., Zhang, H., Guo, H., He, M., Ruan, K., Yu, Z., Wang, G. S., Qiu, H., & Gu, J. (2024). Consistent Thermal Conductivities of Spring‐Like Structured Polydimethylsiloxane Composites under Large Deformation. Advanced Materials, 36(39). https://doi.org/10.1002/adma.202404648
Vancouver
Guo Y, Wang S, Zhang H, Guo H, He M, Ruan K, et al. Consistent Thermal Conductivities of Spring‐Like Structured Polydimethylsiloxane Composites under Large Deformation. Advanced Materials. 2024;36(39). doi:10.1002/adma.202404648
BibTeX
@article{Guo2024,
author = {Guo, Yongqiang and Wang, Shuangshuang and Zhang, Haitian and Guo, Hua and He, MuKun and Ruan, Kunpeng and Yu, Ze and Wang, Guang-Sheng and Qiu, Hua and Gu, Junwei},
title = {Consistent Thermal Conductivities of Spring‐Like Structured Polydimethylsiloxane Composites under Large Deformation},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {39},
doi = {10.1002/adma.202404648}
}
EUVIMED