Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability
Advanced Materials · 2024-08 · 36 (33)
DOI: 10.1002/adma.202401561 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, 2024-07. Verfasst von Guangda Zhu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Molecular Systems Engineering and Advanced Materials, Universität Heidelberg, Im Neuenheimer Feld 225, 69120, Heidelberg, Germany. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, (DFG, German Research Foundation).
Abstract (Originalsprache)
Digital light processing (DLP) is a 3D printing technology offering high resolution and speed. Printable materials are commonly based on multifunctional monomers, resulting in the formation of thermosets that usually cannot be reprocessed or recycled. Some efforts are made in DLP 3D printing of thermoplastic materials. However, these materials exhibit limited and poor mechanical properties. Here, a new strategy is presented for DLP 3D printing of thermoplastics based on a sequential construction of two linear polymers with contrasting (stiff and flexible) mechanical properties. The inks consist of two vinyl monomers, which lead to the stiff linear polymer, and α ‐lipoic acid, which forms the flexible linear polymer via thermal ring‐opening polymerization in a second step. By varying the ratio of stiff and flexible linear polymers, the mechanical properties can be tuned with Young's modulus ranging from 1.1 GPa to 0.7 MPa, while the strain at break increased from 4% to 574%. Furthermore, these printed thermoplastics allow for a variety of reprocessability pathways including self‐healing, solvent casting, reprinting, and closed‐loop recycling of the flexible polymer, contributing to the development of a sustainable materials economy. Last, the potential of the new material in applications ranging from soft robotics to electronics is demonstrated.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Molecular Systems Engineering and Advanced Materials, Universität Heidelberg, Im Neuenheimer Feld 225, 69120, Heidelberg, Germany.
- Institute of Organic Chemistry, Universität Heidelberg, Im Neuenheimer Feld 270, 69120, Heidelberg, Germany.
- Physikalisch-Chemisches Institut, Universität Heidelberg, Im Neuenheimer Feld 253, 69120, Heidelberg, Germany.
ORCID-Profile: Clara Vazquez-Martel, Christoph A Spiegel, Eva Blasco
Förderung
- Deutsche Forschungsgemeinschaft
- (DFG, German Research Foundation)
Zitieren
APA
Zhu, G., von Coelln, N., Hou, Y., Vazquez-Martel, C., Spiegel, C. A., Tegeder, P., & Blasco, E. (2024). Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability. Advanced Materials, 36(33). https://doi.org/10.1002/adma.202401561
Vancouver
Zhu G, von Coelln N, Hou Y, Vazquez-Martel C, Spiegel CA, Tegeder P, et al. Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability. Advanced Materials. 2024;36(33). doi:10.1002/adma.202401561
BibTeX
@article{Zhu2024,
author = {Zhu, Guangda and von Coelln, Nadine and Hou, Yi and Vazquez-Martel, Clara and Spiegel, Christoph A and Tegeder, Petra and Blasco, Eva},
title = {Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {33},
doi = {10.1002/adma.202401561}
}
EUVIMED