One‐Component Carbon Dot Photoinitiator Enables High‐Fidelity Digital Light Processing 3D Printing With Improved Mechanical Resistance
Advanced Functional Materials · 05.11.2026
DOI: 10.1002/adfm.79506 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 05.11.2026. Verfasst von Xiaotong Li und 10 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Developing efficient photoinitiators ( PIs ) from biomass for high‐fidelity, robust, and bio‐safe digital light processing (DLP) 3D printing remains a formidable challenge. Herein, a unique one‐component carbon dot‐based PI ( CD ‐ PO ), capable of high‐fidelity DLP printing, is developed by grafting photocleavable diphenylacylphosphine oxide moieties onto the surface of CD s derived from renewable furfural. The nanostructured CD ‐ PO effectively generates radicals to initiate the photopolymerization of acrylate monomers during DLP printing. Compared to conventional diphenyl(2,4,6‐trimethylbenzoyl)phosphine oxide ( TPO ) used in DLP printing, CD ‐ PO achieves three breakthroughs: 1) CD ‐ PO enables micron‐scale printing precision by optimizing the photocuring depth; 2) CD ‐ PO enhances mechanical resistance, as approved by the increased storage modulus at T g , with the resulting polymer network exhibiting a nano‐composition reinforcement effect that leads to a toughness approximately 4.6 times that of the network photocured with petroleum‐based TPO ; 3) The reduced migration of CD ‐ PO components improves biological safety. The combined effectiveness of CD ‐ PO in initiating photopolymerization, controlling curing depth, and reinforcing mechanical toughness ultimately enables high‐fidelity DLP 3D‐printing of diverse photoresins with structural complexity. In addition, CD ‐ PO maintains high photoreactivity under aerobic conditions at low UV‐LED intensity. This study demonstrates a robust strategy for designing one‐component PI s incorporating biomass‐derived components, further highlighting the versatility of biomass in photopolymerization‐driven applications.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Li, X., Wang, L., Luo, X., Guo, H., Yang, C., Wang, Q., Li, S., Liu, S., Li, J., Strehmel, B., & Chen, Z. (2026). One‐Component Carbon Dot Photoinitiator Enables High‐Fidelity Digital Light Processing 3D Printing With Improved Mechanical Resistance. Advanced Functional Materials. https://doi.org/10.1002/adfm.79506
Vancouver
Li X, Wang L, Luo X, Guo H, Yang C, Wang Q, et al. One‐Component Carbon Dot Photoinitiator Enables High‐Fidelity Digital Light Processing 3D Printing With Improved Mechanical Resistance. Advanced Functional Materials. 2026. doi:10.1002/adfm.79506
BibTeX
@article{Li2026,
author = {Li, Xiaotong and Wang, Luyao and Luo, Xiongfei and Guo, Hongda and Yang, Chenhui and Wang, Qunying and Li, Shujun and Liu, Shouxin and Li, Jian and Strehmel, Bernd and Chen, Zhijun},
title = {One‐Component Carbon Dot Photoinitiator Enables High‐Fidelity Digital Light Processing 3D Printing With Improved Mechanical Resistance},
journal = {Advanced Functional Materials},
year = {2026},
doi = {10.1002/adfm.79506}
}
EUVIMED