Printable Liquid Metal Foams That Grow When Watered
Advanced Materials · 2024-08 · 36 (34)
DOI: 10.1002/adma.202308862 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.01.2024. Verfasst von Febby Krisnadi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Division of Civil, Mechanical and Manufacturing Innovation, Analytical Instrumentation Facility, North Carolina State University.
Abstract (Originalsprache)
Pastes and “foams” containing liquid metal (LM) as the continuous phase (liquid metal foams, LMFs) exhibit metallic properties while displaying paste or putty‐like rheological behavior. These properties enable LMFs to be patterned into soft and stretchable electrical and thermal conductors through processes conducted at room temperature, such as printing. The simplest LMFs, featured in this work, are made by stirring LM in air, thereby entraining oxide‐lined air “pockets” into the LM. Here, it is reported that mixing small amounts of water (as low as 1 wt%) into such LMFs gives rise to significant foaming by harnessing known reactions that evolve hydrogen and produce oxides. The resulting structures can be ≈4–5× their original volume and possess a fascinating combination of attributes: porosity, electrical conductivity, and responsiveness to environmental conditions. This expansion can be utilized for a type of 4D printing in which patterned conductors “grow,” fill cavities, and change shape and density with respect to time. Excessive exposure to water in the long term ultimately consumes the metal in the LMF. However, when exposure to water is controlled, the metallic properties of porous LMFs can be preserved.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, 27695, USA.
- Department of Nano Convergence Engineering, Jeonbuk National University, Jeonju, 54896, South Korea.
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, AZ, 85287, USA.
- School of Chemical Engineering, Sungkyunkwan University, Suwon, 16419, South Korea.
ORCID-Profile: Febby Krisnadi, Konrad Rykaczewski, Michael D Dickey
Förderung
- Division of Civil, Mechanical and Manufacturing Innovation
- Analytical Instrumentation Facility
- North Carolina State University
- State of North Carolina
- National Science Foundation
- North Carolina Research Triangle Nanotechnology Network
- National Nanotechnology Coordinated Infrastructure
Zitieren
APA
Krisnadi, F., Kim, S., Im, S., Chacko, D., Vong, M. H., Rykaczewski, K., Park, S., & Dickey, M. D. (2024). Printable Liquid Metal Foams That Grow When Watered. Advanced Materials, 36(34). https://doi.org/10.1002/adma.202308862
Vancouver
Krisnadi F, Kim S, Im S, Chacko D, Vong MH, Rykaczewski K, et al. Printable Liquid Metal Foams That Grow When Watered. Advanced Materials. 2024;36(34). doi:10.1002/adma.202308862
BibTeX
@article{Krisnadi2024,
author = {Krisnadi, Febby and Kim, Seoyeon and Im, Sooik and Chacko, Dennis and Vong, Man Hou and Rykaczewski, Konrad and Park, Sungjune and Dickey, Michael D},
title = {Printable Liquid Metal Foams That Grow When Watered},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {34},
doi = {10.1002/adma.202308862}
}
EUVIMED