EUVIMEDEUVIMED entdecken
Crossref

Directly Printable and Adhesive Liquid Metal Ink for Wearable Devices

Wenfu Chen, Qianqiang Tang, Weijie Zhong, Mengnan Lai, Shiyang Shi, Jiqian Tan, Ziqing Luo, Xurui Liu, Zhicheng Ye, Rui He, Fulong Jiang, Xuechang Zhou und 1 weitere

Advanced Functional Materials · 2025-01 · 35 (1)

DOI: 10.1002/adfm.202411647 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 22.11.2024. Verfasst von Wenfu Chen und 12 weiteren Autor:innen. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Leveraging the fluidity and excellent conductivity of liquid metal (gallium‐indium alloy), liquid metal (LM) can be utilized to manufacture flexible and stretchable electronic products for applications in soft robotics, wearable devices, and human–machine interaction. However, the high surface tension and low surface adhesion of LM hinder its patterning and high‐resolution fabrication of soft electronics. Here a recyclable LM‐silicon dioxide (LMS) ink is proposed. Under stirring, silicon dioxide (SiO 2 ) particles are encapsulated by the oxide layer of the LM, consuming the oxide layer. Meanwhile, gallium in the LM reacts with oxygen from the air to form a new oxide layer, enhancing the adhesion of the LM to the substrate while maintaining its conductivity. The in‐situ printing of LMS ink is verified on various materials (e.g., paper, polymer, and glass) with a resolution of up to 165 µm and an exceptional conductivity of ≈6.53 × 10 6 S m −1 . The printed patterns can be erased with an anhydrous ethanol solution, allowing the recovered LMS ink to be reused for multiple writing cycles. The general method for direct LM circuits printing can fabricate various wearable sensors for soft electronic devices and human–machine interaction.

Förderung

  • National Natural Science Foundation of China
  • Basic and Applied Basic Research Foundation of Guangdong Province

Zitieren

APA

Chen, W., Tang, Q., Zhong, W., Lai, M., Shi, S., Tan, J., Luo, Z., Liu, X., Ye, Z., He, R., Jiang, F., Zhou, X., & Wang, B. (2025). Directly Printable and Adhesive Liquid Metal Ink for Wearable Devices. Advanced Functional Materials, 35(1). https://doi.org/10.1002/adfm.202411647

Vancouver

Chen W, Tang Q, Zhong W, Lai M, Shi S, Tan J, et al. Directly Printable and Adhesive Liquid Metal Ink for Wearable Devices. Advanced Functional Materials. 2025;35(1). doi:10.1002/adfm.202411647

BibTeX
@article{Chen2025,
  author = {Chen, Wenfu and Tang, Qianqiang and Zhong, Weijie and Lai, Mengnan and Shi, Shiyang and Tan, Jiqian and Luo, Ziqing and Liu, Xurui and Ye, Zhicheng and He, Rui and Jiang, Fulong and Zhou, Xuechang and Wang, Ben},
  title = {Directly Printable and Adhesive Liquid Metal Ink for Wearable Devices},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {1},
  doi = {10.1002/adfm.202411647}
}
Kostenlos starten →