EUVIMEDEUVIMED entdecken
Crossref

Central Core Substitutions and Film‐Formation Process Optimization Enable Approaching 19% Efficiency All‐Polymer Solar Cells

Dingding Qiu, Hao Zhang, Chenyang Tian, Jianqi Zhang, Lingyun Zhu, Zhixiang Wei, Kun Lu iD

Advanced Materials · 2023-12 · 35 (51)

DOI: 10.1002/adma.202307398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 10.11.2023. Verfasst von Dingding Qiu und 6 weiteren Autor:innen. Beteiligte Einrichtung: CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, National Center for Nanoscience and Technology, Beijing, 100190, China. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Chinese Academy of Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Molecular interactions and film‐formation processes greatly impact the blend film morphology and device performances of all‐polymer solar cells (all‐PSCs). Molecular structure, such as the central cores of polymer acceptors, would significantly influence this process. Herein, the central core substitutions of polymer acceptors are adjusted and three quinoxaline (Qx)‐fused‐core‐based materials, PQx1, PQx2, and PQx3 are synthesized. The molecular aggregation ability and intermolecular interaction are systematically regulated, which subsequently influence the film‐formation process and determine the resulting blend film morphology. As a result, PQx3, with favorable aggregation ability and moderate interaction with polymer donor PM6, achieves efficient all‐PSCs with a high power conversion efficiency (PCE) of 17.60%, which could be further improved to 18.06% after carefully optimizing device annealing and interface layer. This impressive PCE is one of the highest values for binary all‐PSCs based on the classical polymer donor PM6. PYF‐T‐ o is also involved in promoting light utilization, and the resulting ternary device shows an impressive PCE of 18.82%. In addition, PM6:PQx3‐based devices exhibit high film‐thickness tolerance, superior stability, and considerable potential for large‐scale devices (16.23% in 1 cm 2 device). These results highlight the importance of structure optimization of polymer acceptors and film‐formation process control for obtaining efficient and stable all‐PSCs.

Schlagwörter

Stichwörter der Autor:innen

all-polymer solar cellscentral core substitutionfilm-formation processintermolecular interactionsquinoxaline

Autor:innen und Institutionen

  • CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, National Center for Nanoscience and Technology, Beijing, 100190, China.
  • Sino-Danish Center for Education and Research, Sino-Danish College, University of Chinese Academy of Sciences, Beijing, 100049, China.
  • School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China.

ORCID-Profile: Kun Lu

Förderung

  • National Natural Science Foundation of China
  • Chinese Academy of Sciences

Zitieren

APA

Qiu, D., Zhang, H., Tian, C., Zhang, J., Zhu, L., Wei, Z., & Lu, K. (2023). Central Core Substitutions and Film‐Formation Process Optimization Enable Approaching 19% Efficiency All‐Polymer Solar Cells. Advanced Materials, 35(51). https://doi.org/10.1002/adma.202307398

Vancouver

Qiu D, Zhang H, Tian C, Zhang J, Zhu L, Wei Z, et al. Central Core Substitutions and Film‐Formation Process Optimization Enable Approaching 19% Efficiency All‐Polymer Solar Cells. Advanced Materials. 2023;35(51). doi:10.1002/adma.202307398

BibTeX
@article{Qiu2023,
  author = {Qiu, Dingding and Zhang, Hao and Tian, Chenyang and Zhang, Jianqi and Zhu, Lingyun and Wei, Zhixiang and Lu, Kun},
  title = {Central Core Substitutions and Film‐Formation Process Optimization Enable Approaching 19% Efficiency All‐Polymer Solar Cells},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {51},
  doi = {10.1002/adma.202307398}
}
Kostenlos starten →