Isomerized Green Solid Additive Engineering for Thermally Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency
Advanced Materials · 2023-12 · 35 (49)
DOI: 10.1002/adma.202308334 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.10.2023. Verfasst von Bin Liu und 21 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Engineering Technology Research Center for Photoelectric Sensing Materials & Devices, Guangzhou Key Laboratory of Sensing Materials & Devic…. Die Arbeit wurde bisher 102-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: Shenzhen Science and Technology Innovation Program, National Natural Science Foundation of China, Natural Science Foundation for Distinguished Young Scholars of Guangdong Province.
Abstract (Originalsprache)
Laboratory‐scale all‐polymer solar cells (all‐PSCs) have exhibited remarkable power conversion efficiencies (PCEs) exceeding 19%. However, the utilization of hazardous solvents and nonvolatile liquid additives poses challenges for eco‐friendly commercialization, resulting in the trade‐off between device efficiency and operation stability. Herein, an innovative approach based on isomerized solid additive engineering is proposed, employing volatile dithienothiophene (DTT) isomers to modulate intermolecular interactions and facilitate molecular stacking within the photoactive layers. Through elucidating the underlying principles of the DTT‐induced polymer assembly on molecular level, a PCE of 18.72% is achieved for devices processed with environmentally benign solvents, ranking it among the highest record values for eco‐friendly all‐PSCs. Significantly, such superiorities of the DTT‐isomerized strategy afford excellent compatibility with large‐area blade‐coating techniques, offering a promising pathway for industrial‐scale manufacturing of all‐PSCs. Moreover, these devices demonstrate enhanced thermal stability with a promising extrapolated T 80 lifetime of 14 000 h, further bolstering their potential for sustainable technological advancement.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Engineering Technology Research Center for Photoelectric Sensing Materials & Devices, Guangzhou Key Laboratory of Sensing Materials & Devices, Center for Advanced Analytical Science, School of Chemistry and Ch…
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, P. R. China.
- Engineering Research Center for Nanomaterials, Henan University, Kaifeng, 475004, P. R. China.
- Department of Electrical and Electronic Engineering, Research Institute for Smart Energy (RISE), Guangdong-Hong Kong-Macao (GHM) Joint Laboratory for Photonic-Thermal-Electrical Energy Materials and Devices, The Hong Ko…
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea.
- Department of Applied Physics, The Hong Kong Polytechnic University, Kowloon, Hong Kong, 999077, P. R. China.
ORCID-Profile: Xugang Guo, Huiliang Sun
Förderung
- Shenzhen Science and Technology Innovation Program
- National Natural Science Foundation of China
- Natural Science Foundation for Distinguished Young Scholars of Guangdong Province
- Basic and Applied Basic Research Foundation of Guangdong Province
- Guangdong Provincial Key Laboratory Program
- Songshan Lake Materials Laboratory
- National Research Foundation of Korea
- Department of Education of Guangdong Province
Zitieren
APA
Liu, B., Xu, W., Ma, R., Lee, J. W., Dela Peña, T. A., Yang, W., Li, B., Li, M., Wu, J., Wang, Y., Zhang, C., Yang, J., Wang, J., Ning, S., Wang, Z., Li, J., Wang, H., Li, G., Kim, B. J., …, & Sun, H. (2023). Isomerized Green Solid Additive Engineering for Thermally Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency. Advanced Materials, 35(49). https://doi.org/10.1002/adma.202308334
Vancouver
Liu B, Xu W, Ma R, Lee JW, Dela Peña TA, Yang W, et al. Isomerized Green Solid Additive Engineering for Thermally Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency. Advanced Materials. 2023;35(49). doi:10.1002/adma.202308334
BibTeX
@article{Liu2023,
author = {Liu, Bin and Xu, Wan and Ma, Ruijie and Lee, Jin-Woo and Dela Peña, Top Archie and Yang, Wanli and Li, Bolin and Li, Mingjie and Wu, Jiaying and Wang, Yimei and Zhang, Chao and Yang, Jie and Wang, Junwei and Ning, Shangbo and Wang, Zhengfei and Li, Jianfeng and Wang, Hua and Li, Gang and Kim, Bumjoon J and Niu, Li and Guo, Xugang and Sun, Huiliang},
title = {Isomerized Green Solid Additive Engineering for Thermally Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {49},
doi = {10.1002/adma.202308334}
}
EUVIMED