EUVIMEDEUVIMED entdecken
Crossref

Solid Polymer Electrolyte with Dual Lewis‐Acid Filler for Ultra‐Stable Lithium Metal Batteries

Piao Luo, Kexin Su, Yuanlong Wu, Xin Song, Lianzhan Huang, Binwen Zeng, Shaocong Zhang, Jun Liu iD, Zhiming Cui iD

Advanced Materials · 2025-07 · 37 (28)

DOI: 10.1002/adma.202501142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 25.04.2025. Verfasst von Piao Luo und 8 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guan…. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangdong Provincial Department of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid polymer electrolytes (SPEs) are regarded as promising candidates that could address the safety concerns associated with liquid electrolytes. Nonetheless, SPEs are still confronting serious lithium dendrite issues, and there is a lack of systematic studies regarding the formation of lithium dendrites within SPEs. Herein, Sand equation is employed to elucidate the determinants of dendrite growth in SPEs, revealing that three factors including the Li + transference number, Li + diffusion coefficient, and Li + concentration are positively correlated with Sand's time (τ) which determine the plating/striping behaviors of Li anode. More importantly, an effective and universal approach is proposed to construct dendrite‐free polymer lithium metal batteries with dual‐Lewis‐acid materials such as Zinc Borate (ZB). Endowed with ZB materials, the PVDF‐HFP based electrolyte possesses sufficient Li + supply and swift transport channel and thus achieves an impressively high Li + transference number of 0.9 and outstanding ionic conductivity at 30 °C (9.2 × 10 −4 S cm −1 ), outperforming the polymer electrolytes with single Lewis‐acid fillers. The electrolyte imparts the LFP//Li cell with exceptional capacity retention, showing almost no decay in discharge capacity even after 700, 500, and 300 cycles at 2 C, 3 C, and 5 C, respectively. Additionally, it capacitates the LiNi 0.6 Mn 0.2 Co 0.2 O 2 //Li cell to outperform by achieving over 1900 cycles at 1C and stably cycling under a cut‐off voltage of 4.5V.

Schlagwörter

Stichwörter der Autor:innen

dual lewis‐acid Sitesion transport dynamiclithium dendritesand equationsolid polymer electrolytes

Autor:innen und Institutionen

  • Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, 510641, China.
  • Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510641, China.
  • School of Software Engineering, South China University of Technology, Guangzhou, 510641, China.

ORCID-Profile: Jun Liu, Zhiming Cui

Förderung

  • National Natural Science Foundation of China
  • Guangdong Provincial Department of Science and Technology

Zitieren

APA

Luo, P., Su, K., Wu, Y., Song, X., Huang, L., Zeng, B., Zhang, S., Liu, J., & Cui, Z. (2025). Solid Polymer Electrolyte with Dual Lewis‐Acid Filler for Ultra‐Stable Lithium Metal Batteries. Advanced Materials, 37(28). https://doi.org/10.1002/adma.202501142

Vancouver

Luo P, Su K, Wu Y, Song X, Huang L, Zeng B, et al. Solid Polymer Electrolyte with Dual Lewis‐Acid Filler for Ultra‐Stable Lithium Metal Batteries. Advanced Materials. 2025;37(28). doi:10.1002/adma.202501142

BibTeX
@article{Luo2025,
  author = {Luo, Piao and Su, Kexin and Wu, Yuanlong and Song, Xin and Huang, Lianzhan and Zeng, Binwen and Zhang, Shaocong and Liu, Jun and Cui, Zhiming},
  title = {Solid Polymer Electrolyte with Dual Lewis‐Acid Filler for Ultra‐Stable Lithium Metal Batteries},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {28},
  doi = {10.1002/adma.202501142}
}
Kostenlos starten →