EUVIMEDEUVIMED entdecken
Crossref

Buried‐Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon

Fu Zhang, Binbin Tu, Shaofei Yang, Ke Fan, Zhiliang Liu, Zhijun Xiong, Jie Zhang, Wei Li, Haitao Huang, Cao Yu iD, Alex K-Y Jen, Kai Yao iD

Advanced Materials · 2023-10 · 35 (42)

DOI: 10.1002/adma.202303139 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.09.2023. Verfasst von Fu Zhang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Photovoltaics/School of Materials Science and Engineering, Nanchang University, Nanchang, 330031, China. Die Arbeit wurde bisher 100-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangxi Province, China, Thousand Talents Plan of Jiangxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Exploring strategies to control the crystallization and modulate interfacial properties for high‐quality perovskite film on industry‐relevant textured crystalline silicon solar cells is highly valued in the perovskite/silicon tandem photovoltaics community. The formation of a 2D/3D perovskite heterojunction is widely employed to passivate defects and suppress ion migration in the film surface of perovskite solar cells. However, realizing solution‐processed heterostructures at the buried interface faces solvent incompatibilities with the challenge of underlying‐layer disruption, and texture incompatibilities with the challenge of uneven coverage. Here, a hybrid two‐step deposition method is used to prepare robust 2D perovskites with cross‐linkable ligands underneath the 3D perovskite. This structurally coherent interlayer benefits by way of preferred crystal growth of strain‐free and uniform upper perovskite, inhibits interfacial defect‐induced instability and recombination, and promotes charge‐carrier extraction with ideal energy‐level alignment. The broad applicability of the bottom‐contact heterostructure for different textured substrates with conformal coverage and various precursor solutions with intact properties free of erosion are demonstrated. With this buried interface engineering strategy, the resulting perovskite/silicon tandem cells, based on industrially textured Czochralski (CZ) silicon, achieve a certified efficiency of 28.4% (1.0 cm 2 ), while retaining 89% of the initial PCE after over 1000 h operation.

Schlagwörter

Stichwörter der Autor:innen

buried interfacial engineeringperovskite heterojunctionsperovskite/silicon tandem solar cellstexture compatibilities

Autor:innen und Institutionen

  • Institute of Photovoltaics/School of Materials Science and Engineering, Nanchang University, Nanchang, 330031, China.
  • Suzhou Maxwell Technologies Co. Ltd, Suzhou, 215200, China.
  • Department of Applied Physics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, China.
  • Department of Materials Science & Engineering, City University of Hong Kong, Kowloon, Hong Kong, 999077, China.
  • Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, P. R. China.
  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China.

ORCID-Profile: Cao Yu, Kai Yao

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangxi Province, China
  • Thousand Talents Plan of Jiangxi Province

Zitieren

APA

Zhang, F., Tu, B., Yang, S., Fan, K., Liu, Z., Xiong, Z., Zhang, J., Li, W., Huang, H., Yu, C., K-Y Jen, A., & Yao, K. (2023). Buried‐Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon. Advanced Materials, 35(42). https://doi.org/10.1002/adma.202303139

Vancouver

Zhang F, Tu B, Yang S, Fan K, Liu Z, Xiong Z, et al. Buried‐Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon. Advanced Materials. 2023;35(42). doi:10.1002/adma.202303139

BibTeX
@article{Zhang2023,
  author = {Zhang, Fu and Tu, Binbin and Yang, Shaofei and Fan, Ke and Liu, Zhiliang and Xiong, Zhijun and Zhang, Jie and Li, Wei and Huang, Haitao and Yu, Cao and K-Y Jen, Alex and Yao, Kai},
  title = {Buried‐Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {42},
  doi = {10.1002/adma.202303139}
}
Kostenlos starten →