Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon
Advanced Materials · 2023-03 · 35 (9)
DOI: 10.1002/adma.202207883 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.01.2023. Verfasst von Xin Luo und 12 weiteren Autor:innen. Beteiligte Einrichtung: National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Frontiers Science Center for Critical Earth Material…. Die Arbeit wurde bisher 203-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Monolithic perovskite/silicon tandem solar cells promise power‐conversion efficiencies (PCEs) exceeding the Shockley‐Queisser limit of single‐junction solar cells. The conformal deposition of perovskites on industrially feasible textured silicon solar cells allows for both lowered manufacturing costs and a higher matched photocurrent density, compared to state‐of‐the‐art tandems using front‐side flat or mildly textured silicon. However, the inferior crystal quality of perovskite films grown on fully‐textured silicon compromises the photovoltaic performance. Here, an anion‐engineered additive strategy is developed to control the crystallization process of wide‐bandgap perovskite films, which enables improved film crystallinity, reduced trap density, and conformal deposition on industrially textured silicon. This strategy allows the fabrication of 28.6%‐efficient perovskite/silicon heterojunction tandem solar cells (certified 27.9%, 1 cm 2 ). This approach is compatible with the scalable fabrication of tandems on industrially textured silicon, demonstrating an efficiency of 25.1% for an aperture area of 16 cm 2 . The anion‐engineered additive significantly improves the operating stability of wide‐bandgap perovskite solar cells, and the encapsulated tandem solar cells retain over 80% of their initial performance following 2000 h of operation under full 1‐sun illumination in ambient conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Frontiers Science Center for Critical Earth Material Cycling, Nanjing University, Nanjing, 210023, China.
- School of Electronics Science and Engineering, Nanjing University, Nanjing, 210023, China.
- State Key Laboratory of PV Science and Technology, Trina Solar, ChangZhou, 213031, China.
ORCID-Profile: Hairen Tan
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- Fundamental Research Funds for the Central Universities
- Research Funds for the Frontiers Science Center for Critical Earth Material Cycling
- Nanjing University
- China Postdoctoral Science Foundation
- Jiangsu Planned Projects for Postdoctoral Research Funds
- Science and Technology Support Plan (Industrial) Project of Changzhou City
Zitieren
APA
Luo, X., Luo, H., Li, H., Xia, R., Zheng, X., Huang, Z., Liu, Z., Gao, H., Zhang, X., Li, S., Feng, Z., Chen, Y., & Tan, H. (2023). Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon. Advanced Materials, 35(9). https://doi.org/10.1002/adma.202207883
Vancouver
Luo X, Luo H, Li H, Xia R, Zheng X, Huang Z, et al. Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon. Advanced Materials. 2023;35(9). doi:10.1002/adma.202207883
BibTeX
@article{Luo2023,
author = {Luo, Xin and Luo, Haowen and Li, Hongjiang and Xia, Rui and Zheng, Xuntian and Huang, Zilong and Liu, Zhou and Gao, Han and Zhang, Xueling and Li, Songlin and Feng, Zhiqiang and Chen, Yifeng and Tan, Hairen},
title = {Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {9},
doi = {10.1002/adma.202207883}
}
EUVIMED