Fabrication of 3D Oriented MOF Micropatterns with Anisotropic Fluorescent Properties
Advanced Materials · 2023-06 · 35 (25)
DOI: 10.1002/adma.202211478 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.05.2023. Verfasst von Miriam de J Velásquez-Hernández und 16 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physical and Theoretical Chemistry, Graz University of Technology, Graz, 8010, Austria. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Research Council.
Abstract (Originalsprache)
Micropatterning crystalline materials with oriented pores is necessary for the fabrication of devices with anisotropic properties. Crystalline and porous metal–organic frameworks (MOFs) are ideal materials as their chemical and structural mutability enables precise tuning of functional properties for applications ranging from microelectronics to photonics. Herein, a patternable oriented MOF film is designed: by using a photomask under X‐ray exposure, the MOF film decomposes in the irradiated areas, remaining intact in the unexposed regions. The MOF film acts simultaneously as a resist and as functional porous material. While the heteroepitaxial growth from aligned Cu(OH) 2 nanobelts is used to deposit oriented MOF films, the sensitivity to radiation is achieved by integrating a brominated dicarboxylate ligand (Br 2 BDC) into a copper‐based MOF Cu 2 L 2 DABCO (DABCO = 1,4‐diazabicyclo[2.2.2]octane; L = BDC/Br 2 BDC). The lithographed samples act as diffraction gratings upon irradiation with a laser, thus confirming the quality of the extended MOF micropattern. Furthermore, the oriented MOF patterns are functionalized with fluorescent dyes. As a result, by rotating the polarization angle of the laser excitation, the alignment of the dye in the MOF is demonstrated. By controlling the functional response to light, this MOF patterning protocol can be used for the microfabrication of optical components for photonic devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Physical and Theoretical Chemistry, Graz University of Technology, Graz, 8010, Austria.
- Institute of Inorganic Chemistry, Graz University of Technology, Graz, 8010, Austria.
- Department of Physics, University of Fribourg, Fribourg, CH-1700, Switzerland.
- Istituto Officina dei Materiali CNR, Edificio MM-SS, Basovizza, Trieste, 34149, Italy.
- Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven, Leuven, 3001, Belgium.
- Department of Chemistry, The University of Adelaide, Adelaide, South Australia, 5005, Australia.
ORCID-Profile: Miriam de J Velásquez-Hernández, Mercedes Linares-Moreau, Benedetta Marmiroli, Mariano Barella, Guillermo P Acuna, Simone Dal Zilio, Margot F K Verstreken, Dmitry E Kravchenko, Jack D Evans, Helmar Wiltsche, Francesco Carraro, Heimo Wolinski, Rob Ameloot, Christian Doonan, Paolo Falcaro
Förderung
- European Research Council
Zitieren
APA
Velásquez-Hernández, M. J., Linares-Moreau, M., Brandner, L. A., Marmiroli, B., Barella, M., Acuna, G. P., Zilio, S. D., Verstreken, M. F. K., Kravchenko, D. E., Linder-Patton, O. M., Evans, J. D., Wiltsche, H., Carraro, F., Wolinski, H., Ameloot, R., Doonan, C., & Falcaro, P. (2023). Fabrication of 3D Oriented MOF Micropatterns with Anisotropic Fluorescent Properties. Advanced Materials, 35(25). https://doi.org/10.1002/adma.202211478
Vancouver
Velásquez-Hernández MJ, Linares-Moreau M, Brandner LA, Marmiroli B, Barella M, Acuna GP, et al. Fabrication of 3D Oriented MOF Micropatterns with Anisotropic Fluorescent Properties. Advanced Materials. 2023;35(25). doi:10.1002/adma.202211478
BibTeX
@article{VelsquezHernndez2023,
author = {Velásquez-Hernández, Miriam de J and Linares-Moreau, Mercedes and Brandner, Lea A and Marmiroli, Benedetta and Barella, Mariano and Acuna, Guillermo P and Zilio, Simone Dal and Verstreken, Margot F K and Kravchenko, Dmitry E and Linder-Patton, Oliver M and Evans, Jack D and Wiltsche, Helmar and Carraro, Francesco and Wolinski, Heimo and Ameloot, Rob and Doonan, Christian and Falcaro, Paolo},
title = {Fabrication of 3D Oriented MOF Micropatterns with Anisotropic Fluorescent Properties},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {25},
doi = {10.1002/adma.202211478}
}
EUVIMED