EUVIMEDEUVIMED entdecken
Crossref

Formulation‐Driven Design of Antimicrobial Hydrogel Wound Patches 3D‐Printed by Digital Light Processing: Mapping Polysaccharide and Nanoparticle Effects

M A Shadab Siddiqui iD, Maidul Hasan iD, Mahlet Tsedalu Adane, Walid Hossain iD, Md Iftekhar Shams iD, Md Sanaul Rabbi iD, Ammar Alsheghri iD, Md Abdul Aziz iD, M Nasiruzzaman Shaikh iD, Fahad Alam iD

Advanced Healthcare Materials · 06.11.2026

DOI: 10.1002/adhm.71948 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 06.11.2026. Verfasst von M A Shadab Siddiqui und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia. Die Arbeit nennt 159 Literaturangaben. Gefördert von: KFUPM Funded.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wound dressings must balance antimicrobial efficacy with the printability limits imposed by nanoparticle‐mediated ultraviolet attenuation during digital light processing 3D printing. Here, we develop process–structure–property relationships for poly(ethylene glycol) diacrylate (PEGDA)‐based hydrogel wound patches containing Ag/ZnO‐derived antimicrobial phases and polysaccharide/cellulose modifiers (cellulose nanofibrils, chitosan, or alginate). Beer–Lambert analysis shows that nanoparticle loading reduces optical penetration depth at 405 nm to 1.04‐1.28 mm, narrowing the usable curing margin so that radiant exposure exceeds the critical energy by only 4%–5%. Flory–Rehner analysis of swelling reveals formulation‐dependent crosslink density: alginate lowers effective crosslink density by 45% vs. neat PEGDA and increases mesh size from 0.42 to 0.60 nm. This network loosening drives 1.5× variation in water vapor transmission rate (WVTR; 346–518 g·m − 2 ·day − 1 ) and a 7× range in wettability (11.5°–81.1°). Two‐way factorial analysis identifies polysaccharide type as the dominant driver of swelling (87.5% of variance) and antimicrobial efficacy (>50%), while nanoparticle type controls contact angle (60.1%) and WVTR (76.9%). The Ag + chitosan formulation (S5) achieves 23–24 mm inhibition zones against Escherichia coli and Bacillus sp. via chitosan‐facilitated Ag + diffusion plus intrinsic contact‐killing. Inductively coupled plasma optical emission spectroscopy confirms cumulative Ag + release (32.7 mg·L − 1 over 14 days), while Zn 2 + remains immobilized below detection.

Schlagwörter

Stichwörter der Autor:innen

DLP 3D printingPEGDAantibacterial wound dressingchitosanprocess‐structure‐propertyvat‐photopolymerization

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia.
  • Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia.
  • Forestry and Wood Technology Discipline, Khulna University, Bangladesh.
  • Department of Mechanical Engineering, Chittagong University of Engineering and Technology, Chattogram, Bangladesh.
  • Interdisciplinary Research Center For Biosystems and Machines, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia.
  • Interdisciplinary Research Center For Hydrogen Technologies and Carbon Management (IRC-HTCM), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia.

ORCID-Profile: M A Shadab Siddiqui, Maidul Hasan, Walid Hossain, Md Iftekhar Shams, Md Sanaul Rabbi, Ammar Alsheghri, Md Abdul Aziz, M Nasiruzzaman Shaikh, Fahad Alam

Förderung

  • KFUPM Funded

Zitieren

APA

Siddiqui, M. A. S., Hasan, M., Adane, M. T., Hossain, W., Shams, M. I., Rabbi, M. S., Alsheghri, A., Aziz, M. A., Shaikh, M. N., & Alam, F. (2026). Formulation‐Driven Design of Antimicrobial Hydrogel Wound Patches 3D‐Printed by Digital Light Processing: Mapping Polysaccharide and Nanoparticle Effects. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.71948

Vancouver

Siddiqui MAS, Hasan M, Adane MT, Hossain W, Shams MI, Rabbi MS, et al. Formulation‐Driven Design of Antimicrobial Hydrogel Wound Patches 3D‐Printed by Digital Light Processing: Mapping Polysaccharide and Nanoparticle Effects. Advanced Healthcare Materials. 2026. doi:10.1002/adhm.71948

BibTeX
@article{Siddiqui2026,
  author = {Siddiqui, M A Shadab and Hasan, Maidul and Adane, Mahlet Tsedalu and Hossain, Walid and Shams, Md Iftekhar and Rabbi, Md Sanaul and Alsheghri, Ammar and Aziz, Md Abdul and Shaikh, M Nasiruzzaman and Alam, Fahad},
  title = {Formulation‐Driven Design of Antimicrobial Hydrogel Wound Patches 3D‐Printed by Digital Light Processing: Mapping Polysaccharide and Nanoparticle Effects},
  journal = {Advanced Healthcare Materials},
  year = {2026},
  doi = {10.1002/adhm.71948}
}
Kostenlos starten →