EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bioprinting of Stable Bionic Interfaces Using Piezoresistive Hydrogel Organoelectronics

Antonia Georgopoulou iD, Miriam Filippi, Lisa Stefani, Felix Drescher, Aiste Balciunaite, Arnaud Scherberich, Robert Katzschmann, Frank Clemens

Advanced Healthcare Materials · 2024-08 · 13 (20)

DOI: 10.1002/adhm.202400051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 03.05.2024. Verfasst von Antonia Georgopoulou und 7 weiteren Autor:innen. Beteiligte Einrichtung: High Performance Ceramics Laboratory, Empa, Swiss Federal Laboratories for Material Science and Technology, Dübendorf, 8600, Switzerland. Hauptthemen laut MEDLINE: Bioprinting, Hydrogels, Bionics, Tissue Engineering. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, Horizon 2020 Framework Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bionic tissues offer an exciting frontier in biomedical research by integrating biological cells with artificial electronics, such as sensors. One critical hurdle is the development of artificial electronics that can mechanically harmonize with biological tissues, ensuring a robust interface for effective strain transfer and local deformation sensing. In this study, a highly tissue‐integrative, soft mechanical sensor fabricated from a composite piezoresistive hydrogel. The composite not only exhibits exceptional mechanical properties, with elongation at the point of fracture reaching up to 680%, but also maintains excellent biocompatibility across multiple cell types. Furthermore, the material exhibits bioadhesive qualities, facilitating stable cell adhesion to its surface. A unique advantage of the formulation is the compatibility with 3D bioprinting, an essential technique for fabricating stable interfaces. A multimaterial sensorized 3D bionic construct is successfully bioprinted, and it is compared to structures produced via hydrogel casting. In contrast to cast constructs, the bioprinted ones display a high (87%) cell viability, preserve differentiation ability, and structural integrity of the sensor–tissue interface throughout the tissue development duration of 10 d. With easy fabrication and effective soft tissue integration, this composite holds significant promise for various biomedical applications, including implantable electronics and organ‐on‐a‐chip technologies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BioprintingHydrogelsBionicsTissue EngineeringPrinting, Three-DimensionalHumansAnimalsCell SurvivalBiocompatible MaterialsMiceCell AdhesionElectronics

Stichwörter der Autor:innen

bionic devicesbioprintinghydrogelssensingstretchable electronics

Substanzen

HydrogelsBiocompatible Materials

Autor:innen und Institutionen

  • High Performance Ceramics Laboratory, Empa, Swiss Federal Laboratories for Material Science and Technology, Dübendorf, 8600, Switzerland.
  • Soft Robotics Laboratory, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, 8092, Switzerland.
  • Department of Biomedicine, University Hospital Basel, University of Basel, Basel, 4031, Switzerland.

ORCID-Profile: Antonia Georgopoulou

Förderung

  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • Horizon 2020 Framework Programme

Zitieren

APA

Georgopoulou, A., Filippi, M., Stefani, L., Drescher, F., Balciunaite, A., Scherberich, A., Katzschmann, R., & Clemens, F. (2024). Bioprinting of Stable Bionic Interfaces Using Piezoresistive Hydrogel Organoelectronics. Advanced Healthcare Materials, 13(20). https://doi.org/10.1002/adhm.202400051

Vancouver

Georgopoulou A, Filippi M, Stefani L, Drescher F, Balciunaite A, Scherberich A, et al. Bioprinting of Stable Bionic Interfaces Using Piezoresistive Hydrogel Organoelectronics. Advanced Healthcare Materials. 2024;13(20). doi:10.1002/adhm.202400051

BibTeX
@article{Georgopoulou2024,
  author = {Georgopoulou, Antonia and Filippi, Miriam and Stefani, Lisa and Drescher, Felix and Balciunaite, Aiste and Scherberich, Arnaud and Katzschmann, Robert and Clemens, Frank},
  title = {Bioprinting of Stable Bionic Interfaces Using Piezoresistive Hydrogel Organoelectronics},
  journal = {Advanced Healthcare Materials},
  year = {2024},
  volume = {13},
  number = {20},
  doi = {10.1002/adhm.202400051}
}
Kostenlos starten →