EUVIMEDEUVIMED entdecken
Crossref

Photocrosslinkable Hydrogel Microparticle Bioink for Digital‐Light‐Processing 3D Bioprinting

Shuiling Jin, Yanzhen Jing, Haowen Lu, Lufeng Shi, Mengying An, Xuesong Ye, Yifan Wang, Xiujun Cai, Shangjing Xin iD

Small Methods · 2025

DOI: 10.1002/smtd.202500115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, 2025. Verfasst von Shuiling Jin und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Biomedical Engineering & Instrument Science, Key Laboratory for Biomedical Engineering of Ministry of Education, Zhejiang University, Hang…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bioprinting, Hydrogels. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Zhejiang University ZJU100 Start-up Funds, Zhejiang University Collaborative Seed Funds between BME and SRRS Hospital, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital light processing (DLP) 3D bioprinting is a powerful technique for fabricating intricate tissue structures, yet it faces challenges related to limited bioink selection, difficulty in printing heterogeneous materials, and poor cell incorporation. In this study, photocrosslinkable hydrogel microparticle (HMP) bioinks tailored for DLP bioprinting are developed and optimized. Unlike traditional extrusion‐based printing of HMPs that rely on jamming, the DLP approach eliminates this constraint, enabling improved printing resolution and cytocompatibility. It is demonstrated that the aqueous components, such as crosslinkers and photoinitiators, mixed in HMP bioinks ensure sufficient fluidity, supporting consistent DLP printing across a broad range of parameters. Small HMPs (28.2 ± 1.78 µm) provided better structural fidelity than large HMPs (75.0 ± 4.73 µm). Optimized crosslinking conditions and finely tuned UV exposure settings further enabled high‐resolution printing, including the formation of serpentine inner channels. Importantly, cell‐laden HMP bioinks maintained high viability, achieved uniform cell distribution within printed constructs, and supported their continued growth due to the void spaces between HMPs. The modular nature of HMPs also allowed straightforward multi‐material printing. This work expands the application of HMP bioinks to DLP bioprinting, offering a versatile platform for biomanufacturing tissue constructs with microscopic compartmentalization for tissue engineering applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBioprintingHydrogelsTissue EngineeringInkCross-Linking ReagentsAnimalsUltraviolet RaysHumansTissue ScaffoldsCell SurvivalMice

Stichwörter der Autor:innen

3D printingcell printingdigital light processinghydrogel microparticlestissue engineering

Substanzen

HydrogelsCross-Linking Reagents

Autor:innen und Institutionen

  • College of Biomedical Engineering & Instrument Science, Key Laboratory for Biomedical Engineering of Ministry of Education, Zhejiang University, Hangzhou, 310027, China.
  • National Engineering Research Center of Innovation and Application of Minimally Invasive Instruments, Zhejiang University, Hangzhou, 310016, China.
  • Department of General Surgery, Zhejiang Provincial Key Laboratory of Laparoscopic Technology, Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, Hangzhou, 310016, China.
  • Department of Neurosurgery, Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, Hangzhou, 310016, China.
  • Innovation Center for Smart Medical Technologies & Devices, Binjiang Institute of Zhejiang University, Hangzhou, 310053, China.

ORCID-Profile: Shangjing Xin

Förderung

  • Zhejiang University ZJU100 Start-up Funds
  • Zhejiang University Collaborative Seed Funds between BME and SRRS Hospital
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Jin, S., Jing, Y., Lu, H., Shi, L., An, M., Ye, X., Wang, Y., Cai, X., & Xin, S. (2025). Photocrosslinkable Hydrogel Microparticle Bioink for Digital‐Light‐Processing 3D Bioprinting. Small Methods. https://doi.org/10.1002/smtd.202500115

Vancouver

Jin S, Jing Y, Lu H, Shi L, An M, Ye X, et al. Photocrosslinkable Hydrogel Microparticle Bioink for Digital‐Light‐Processing 3D Bioprinting. Small Methods. 2025. doi:10.1002/smtd.202500115

BibTeX
@article{Jin2025,
  author = {Jin, Shuiling and Jing, Yanzhen and Lu, Haowen and Shi, Lufeng and An, Mengying and Ye, Xuesong and Wang, Yifan and Cai, Xiujun and Xin, Shangjing},
  title = {Photocrosslinkable Hydrogel Microparticle Bioink for Digital‐Light‐Processing 3D Bioprinting},
  journal = {Small Methods},
  year = {2025},
  doi = {10.1002/smtd.202500115}
}
Kostenlos starten →