Toward 3D Bioprinting of Osseous Tissue of Predefined Shape Using Single‐Matrix Cell‐Bioink Constructs
Advanced Healthcare Materials · 2023
DOI: 10.1002/adhm.202202550 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Healthcare Materials, 2023. Verfasst von Yawei Gu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Macromolecular Chemistry, University of Freiburg, 79104, Freiburg, Germany. Hauptthemen laut MEDLINE: Bioprinting. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: China Scholarship Council, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung.
Abstract (Originalsprache)
Engineering living bone tissue of defined shape on‐demand has remained a challenge. 3D bioprinting (3DBP), a biofabrication process capable of yielding cell constructs of defined shape, when combined with developmental engineering can provide a possible path forward. Through the development of a bioink possessing appropriate rheological properties to carry a high cell load and concurrently yield physically stable structures, printing of stable, cell‐laden, single‐matrix constructs of anatomical shapes is realized without the need for fugitive or support phases. Using this bioink system, constructs of hypertrophic cartilage of predesigned geometry are engineered in vitro by printing human mesenchymal stromal cells at a high density to drive spontaneous condensation and implanted in nude mice to evoke endochondral ossification. The implanted constructs retain their prescribed shape over a 12‐week period and undergo remodeling to yield ossicles of the designed shape with neovascularization. Microcomputed tomography, histological, and immunohistochemistry assessments confirm bone tissue characteristics and the presence of human cells. These results demonstrate the potential of 3DBP to fabricate complex bone tissue for clinical application.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Macromolecular Chemistry, University of Freiburg, 79104, Freiburg, Germany.
- Department of Biomedicine, University Hospital Basel, University of Basel, Basel, 4031, Switzerland.
- BIOSS Centre for Biological Signalling Studies, University of Freiburg, 79104, Freiburg, Germany.
ORCID-Profile: V Prasad Shastri
Förderung
- China Scholarship Council
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
Zitieren
APA
Gu, Y., Pigeot, S., Ahrens, L., Tribukait-Riemenschneider, F., Sarem, M., Wolf, F., García-García, A., Barbero, A., Martin, I., & Shastri, V. P. (2023). Toward 3D Bioprinting of Osseous Tissue of Predefined Shape Using Single‐Matrix Cell‐Bioink Constructs. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.202202550
Vancouver
Gu Y, Pigeot S, Ahrens L, Tribukait-Riemenschneider F, Sarem M, Wolf F, et al. Toward 3D Bioprinting of Osseous Tissue of Predefined Shape Using Single‐Matrix Cell‐Bioink Constructs. Advanced Healthcare Materials. 2023. doi:10.1002/adhm.202202550
BibTeX
@article{Gu2023,
author = {Gu, Yawei and Pigeot, Sebastien and Ahrens, Lucas and Tribukait-Riemenschneider, Fabian and Sarem, Melika and Wolf, Francine and García-García, Andres and Barbero, Andrea and Martin, Ivan and Shastri, V Prasad},
title = {Toward 3D Bioprinting of Osseous Tissue of Predefined Shape Using Single‐Matrix Cell‐Bioink Constructs},
journal = {Advanced Healthcare Materials},
year = {2023},
doi = {10.1002/adhm.202202550}
}
EUVIMED