EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Clay Sculpture‐Inspired 3D Printed Microcage Module Using Bioadhesion Assembly for Specific‐Shaped Tissue Vascularization and Regeneration

Huimin Fang, Jingyi Ju, Lifeng Chen, Muran Zhou, Guo Zhang, Jinfei Hou, Wenbin Jiang, Zhenxing Wang, Jiaming Sun iD

Advanced Science · 2024

DOI: 10.1002/advs.202308381 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, 2024. Verfasst von Huimin Fang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Plastic Surgery, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, 430022, China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Engineering, Hydrogels, Mice, Nude. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Hubei Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D bioprinting techniques have enabled the fabrication of irregular large‐sized tissue engineering scaffolds. However, complicated customized designs increase the medical burden. Meanwhile, the integrated printing process hinders the cellular uniform distribution and local angiogenesis. A novel approach is introduced to the construction of sizable tissue engineering grafts by employing hydrogel 3D printing for modular bioadhesion assembly, and a poly (ethylene glycol) diacrylate (PEGDA)‐gelatin‐dopamine (PGD) hydrogel, photosensitive and adhesive, enabling fine microcage module fabrication via DLP 3D printing is developed. The PGD hydrogel printed micocages are flexible, allowing various shapes and cell/tissue fillings for repairing diverse irregular tissue defects. In vivo experiments demonstrate robust vascularization and superior graft survival in nude mice. This assembly strategy based on scalable 3D printed hydrogel microcage module could simplify the construction of tissue with large volume and complex components, offering promise for diverse large tissue defect repairs.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue EngineeringHydrogelsMice, NudeTissue ScaffoldsAnimalsMiceGelatinBioprintingPolyethylene GlycolsNeovascularization, PhysiologicDopamineRegenerationHumans

Stichwörter der Autor:innen

3D bioprinting3D printingassemblybioadhesionhydrogeltissue engineering

Substanzen

HydrogelsGelatinPolyethylene Glycolspoly(ethylene glycol)diacrylateDopamine

Autor:innen und Institutionen

  • Department of Plastic Surgery, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, 430022, China.

ORCID-Profile: Jiaming Sun

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • Hubei Natural Science Foundation
  • National Key Research and Development Program of China

Zitieren

APA

Fang, H., Ju, J., Chen, L., Zhou, M., Zhang, G., Hou, J., Jiang, W., Wang, Z., & Sun, J. (2024). Clay Sculpture‐Inspired 3D Printed Microcage Module Using Bioadhesion Assembly for Specific‐Shaped Tissue Vascularization and Regeneration. Advanced Science. https://doi.org/10.1002/advs.202308381

Vancouver

Fang H, Ju J, Chen L, Zhou M, Zhang G, Hou J, et al. Clay Sculpture‐Inspired 3D Printed Microcage Module Using Bioadhesion Assembly for Specific‐Shaped Tissue Vascularization and Regeneration. Advanced Science. 2024. doi:10.1002/advs.202308381

BibTeX
@article{Fang2024,
  author = {Fang, Huimin and Ju, Jingyi and Chen, Lifeng and Zhou, Muran and Zhang, Guo and Hou, Jinfei and Jiang, Wenbin and Wang, Zhenxing and Sun, Jiaming},
  title = {Clay Sculpture‐Inspired 3D Printed Microcage Module Using Bioadhesion Assembly for Specific‐Shaped Tissue Vascularization and Regeneration},
  journal = {Advanced Science},
  year = {2024},
  doi = {10.1002/advs.202308381}
}
Kostenlos starten →