Guiding Morphology Evolution via Solid‐State Relaxation for Highly Reproducible and Robust Organic Photovoltaics
Advanced Functional Materials · 29.10.2026
DOI: 10.1002/adfm.79386 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 29.10.2026. Verfasst von Xingpeng Liu und 15 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: Ministry of Education of the People's Republic of China, National Natural Science Foundation of China, Basic and Applied Basic Research Foundation of Guangdong Province.
Abstract (Originalsprache)
Poor device reproducibility and insufficient processing robustness hinder organic photovoltaics (OPVs) industrialization, primarily due to poor morphological reproducibility of the active layer. Here, we establish a direct correlation between the morphology evolution pathway and morphological reproducibility. When evolution is governed by solid‐state relaxation, the active layer converges into energetically similar low‐energy metastable ensembles, yielding highly reproducible morphologies. In contrast, rapid quenching traps the active layer in a broad distribution of low‐energy metastable states, leading to poor morphological reproducibility. This principle is validated through two independent approaches: molecular structure design and additive engineering. Chemically, acceptor dimerization (PM6:DY2) shifts evolution from quenching‐ to relaxation‐dominated, reducing the coefficient of variation ( CV , a reproducibility measure) from 2.14% to 1.19% and increasing the performance figure of merit ( P‐FOM , a robustness measure) from 0.925 to 0.944. Physically, replacing the additive 1,2,4‐TCB with 1,3,5‐TIB delays the evolution of PM6:L8‐BO to the relaxation stage, achieving 19.59% PCE while achieving a record‐low CV of 0.86% (reduced from 1.55%) and increasing P‐FOM from 0.935 to 0.955. These findings establish a general principle: solid‐state relaxation‐dominated evolution leads to morphological convergence and device performance consistency, providing a theoretical basis for rational design toward high reproducibility and robustness in OPVs.
Förderung
- Ministry of Education of the People's Republic of China
- National Natural Science Foundation of China
- Basic and Applied Basic Research Foundation of Guangdong Province
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Liu, X., Wan, L., Yu, R., He, Z., Zhang, Y., Yang, X., Zhao, C., Zhou, R., Liu, Z., Xin, J., Song, C., Tang, B., Yu, W., Zhang, Z., Liang, Q., & Liu, J. (2026). Guiding Morphology Evolution via Solid‐State Relaxation for Highly Reproducible and Robust Organic Photovoltaics. Advanced Functional Materials. https://doi.org/10.1002/adfm.79386
Vancouver
Liu X, Wan L, Yu R, He Z, Zhang Y, Yang X, et al. Guiding Morphology Evolution via Solid‐State Relaxation for Highly Reproducible and Robust Organic Photovoltaics. Advanced Functional Materials. 2026. doi:10.1002/adfm.79386
BibTeX
@article{Liu2026,
author = {Liu, Xingpeng and Wan, Longjing and Yu, Ruikai and He, Zemin and Zhang, Yutong and Yang, Xiao and Zhao, Chuanhao and Zhou, Rui and Liu, Zirui and Xin, Jingming and Song, Chunpeng and Tang, Bin and Yu, Wancheng and Zhang, Zhi‐Guo and Liang, Qiuju and Liu, Jiangang},
title = {Guiding Morphology Evolution via Solid‐State Relaxation for Highly Reproducible and Robust Organic Photovoltaics},
journal = {Advanced Functional Materials},
year = {2026},
doi = {10.1002/adfm.79386}
}
EUVIMED