In‐Depth Investigation of Morphology Evolution in Highly Efficient Pseudo‐Planar Heterojunction All‐polymer Organic Photovoltaics
Advanced Functional Materials · 2025-08 · 35 (33)
DOI: 10.1002/adfm.202500975 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 16.03.2025. Verfasst von Xingpeng Liu und 12 weiteren Autor:innen. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Pseudo‐planar heterojunction (PPHJ) structure using sequential deposition is an effective method for achieving high‐efficiency organic photovoltaics (OPVs). The crystallization and phase separation behavior during film‐forming process is intricately related to morphology with PPHJ structure. Despite this, the relationship between these two factors remains ambiguous, thereby impeding further improvements in performance. To tackle this challenge, PM6 and PY‐DT all‐polymer systems as models are utilized, and combine theoretical calculations, in situ spectroscopy, and morphological characterization to elucidate the aforementioned relationship. Thermodynamically, PPHJ film‐forming process can effectively suppress van der Waals forces, increase the crystallinity of PM6, and promote matching crystallinity. Kinetically, the crystallization rate is notably faster and more sustained, facilitating the development of an interpenetrating network structure with enhanced crystallinity. Furthermore, PPHJ film‐forming process is driven by crystallization‐induced‐phase separation, characterized by minimal intermixed phase content and substantial domain size. Concurrently, PM6 layer swells to a limited extent, impeding the downward diffusion of PY‐DT, which promotes the formation of a vertical phase separation structure. Ultimately, the favorable morphology is achieved by optimizing PPHJ film‐forming process, resulting in the power conversion efficiency (PCE) of 18.08%, which is the highest PCEs reported for binary all‐polymer OPVs based on PPHJ structure to date.
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Fundamental Research Funds for the Central Universities
- Natural Science Basic Research Program of Shaanxi Province
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Liu, X., Zhang, Y., Fu, S., Wan, L., Wang, H., Zhang, Y., Liu, Z., Peng, J., Li, J., Song, C., Miao, Z., Liang, Q., & Liu, J. (2025). In‐Depth Investigation of Morphology Evolution in Highly Efficient Pseudo‐Planar Heterojunction All‐polymer Organic Photovoltaics. Advanced Functional Materials, 35(33). https://doi.org/10.1002/adfm.202500975
Vancouver
Liu X, Zhang Y, Fu S, Wan L, Wang H, Zhang Y, et al. In‐Depth Investigation of Morphology Evolution in Highly Efficient Pseudo‐Planar Heterojunction All‐polymer Organic Photovoltaics. Advanced Functional Materials. 2025;35(33). doi:10.1002/adfm.202500975
BibTeX
@article{Liu2025,
author = {Liu, Xingpeng and Zhang, Yutong and Fu, Shaopeng and Wan, Longjing and Wang, Huan and Zhang, Yan and Liu, Zefeng and Peng, Jing and Li, Jianfeng and Song, Chunpeng and Miao, Zongcheng and Liang, Qiuju and Liu, Jiangang},
title = {In‐Depth Investigation of Morphology Evolution in Highly Efficient Pseudo‐Planar Heterojunction All‐polymer Organic Photovoltaics},
journal = {Advanced Functional Materials},
year = {2025},
volume = {35},
number = {33},
doi = {10.1002/adfm.202500975}
}
EUVIMED