EUVIMEDEUVIMED entdecken
Crossref

Engineering a Conformal and Lossless Interconnect via Ultrathin ITO for High‐Efficiency Perovskite/Silicon Tandem Solar Cells

Qinqin Wang, Wei Huang, Kaiyuan Guo, Wangping Wu, Siwen Gu, Yushuai Xu, Haipeng Yin, Zi Ouyang, Yang Sun, Ke Tao, Baohai Yang, Lvzhou Li und 1 weitere

Advanced Functional Materials · 2026-06 · 36 (45)

DOI: 10.1002/adfm.75311 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 07.04.2026. Verfasst von Qinqin Wang und 12 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Monolithic perovskite/silicon tandem solar cells are highly attractive due to their potential for high power conversion efficiency (PCE). In tandem solar cells, the perovskite top cell and silicon bottom cell are connected via a recombination layer, and the quality of this interface directly affects carrier transport and recombination. However, in silicon heterojunction (SHJ) cells–particularly on micro‐pyramidal (∼600 nm‐thick) textured surfaces, optical losses in the composite layer and non‐uniform coverage of the self‐assembled monolayer (SAM) remain challenging. Here, we investigated the optoelectronic properties of indium tin oxide (ITO) composite layers with thickness ranging from 2 to 30 nm, by optimizing the intermediate composite layer, optical losses in perovskite/silicon tandem solar cells were effectively reduced, and surface potential uniformity was enhanced. We selected an ultra‐thin (8 nm‐thick) ITO layer modified with nickel oxide (NiO x ), which was implemented as a composite interconnect, with a Poly‐SAM layer employed to realize these enhancements. Compared to the reference thickness, the optimized device exhibited an increase in short‐circuit current density of 0.85 mA cm −2 , achieving a high value of 20.82 mA cm −2 , and a power conversion efficiency of 31.80 % was achieved, and 96 % of the initial PCE was retained after 500 h of maximum power point tracking.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Q., Huang, W., Guo, K., Wu, W., Gu, S., Xu, Y., Yin, H., Ouyang, Z., Sun, Y., Tao, K., Yang, B., Li, L., & Ding, J. (2026). Engineering a Conformal and Lossless Interconnect via Ultrathin ITO for High‐Efficiency Perovskite/Silicon Tandem Solar Cells. Advanced Functional Materials, 36(45). https://doi.org/10.1002/adfm.75311

Vancouver

Wang Q, Huang W, Guo K, Wu W, Gu S, Xu Y, et al. Engineering a Conformal and Lossless Interconnect via Ultrathin ITO for High‐Efficiency Perovskite/Silicon Tandem Solar Cells. Advanced Functional Materials. 2026;36(45). doi:10.1002/adfm.75311

BibTeX
@article{Wang2026,
  author = {Wang, Qinqin and Huang, Wei and Guo, Kaiyuan and Wu, Wangping and Gu, Siwen and Xu, Yushuai and Yin, Haipeng and Ouyang, Zi and Sun, Yang and Tao, Ke and Yang, Baohai and Li, Lvzhou and Ding, Jianning},
  title = {Engineering a Conformal and Lossless Interconnect via Ultrathin ITO for High‐Efficiency Perovskite/Silicon Tandem Solar Cells},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {45},
  doi = {10.1002/adfm.75311}
}
Kostenlos starten →