EUVIMEDEUVIMED entdecken
Crossref

Deep Eutectic Interlayer Design for Stability Enhancement in LLZTO Solid‐State Lithium Batteries

Sihong Long, Boshun Gui, Chengjie Li, Binbin Yang, Lipu Sun, Yu Zhan, Chuhuai Huang, Jianing Tian, Feng Wu, Nan Chen, Renjie Chen

Advanced Functional Materials · 2026-01 · 36 (8)

DOI: 10.1002/adfm.202513024 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 21.08.2025. Verfasst von Sihong Long und 10 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) is a typical inorganic garnet‐type ceramic solid electrolyte. By combining LLZTO with polyacrylonitrile (PAN), a homogeneous composite electrolyte film can be obtained, which is self‐supporting and can be directly used as a solid‐state electrolyte. However, PAN and its composite electrolyte exhibit low ionic conductivity at room temperature and suffer from poor solid‐solid interface contact with the lithium metal anode. Herein, a method of using succinonitrile (SN) deep eutectic electrolyte is proposed to modify the solid‐state electrolyte interface, thereby preventing corrosion reactions and improving the Li + transference number of the composite solid electrolyte (PALS) to 0.66. The introduction of the interface modification layer enables the formation of a stable and dense solid‐electrolyte interphase (SEI) layer at the interface between the lithium anode and the solid‐state electrolyte, reducing interfacial impedance and improving the ionic conductivity of the solid‐state electrolyte. The Li/PALS/lithium iron phosphate (LFP) full cell exhibits an initial specific capacity of 147 mAh·g −1 at a 0.5 C rate, with 97.3% capacity retention after 190 cycles at room temperature. This work presents a novel approach to improving the interfacial contact between LLZTO and lithium metal anode, offering new insights for the design of fast‐rate, safe, and durable solid‐state electrolytes.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Natural Science Foundation of Shandong Province

Zitieren

APA

Long, S., Gui, B., Li, C., Yang, B., Sun, L., Zhan, Y., Huang, C., Tian, J., Wu, F., Chen, N., & Chen, R. (2026). Deep Eutectic Interlayer Design for Stability Enhancement in LLZTO Solid‐State Lithium Batteries. Advanced Functional Materials, 36(8). https://doi.org/10.1002/adfm.202513024

Vancouver

Long S, Gui B, Li C, Yang B, Sun L, Zhan Y, et al. Deep Eutectic Interlayer Design for Stability Enhancement in LLZTO Solid‐State Lithium Batteries. Advanced Functional Materials. 2026;36(8). doi:10.1002/adfm.202513024

BibTeX
@article{Long2026,
  author = {Long, Sihong and Gui, Boshun and Li, Chengjie and Yang, Binbin and Sun, Lipu and Zhan, Yu and Huang, Chuhuai and Tian, Jianing and Wu, Feng and Chen, Nan and Chen, Renjie},
  title = {Deep Eutectic Interlayer Design for Stability Enhancement in LLZTO Solid‐State Lithium Batteries},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {8},
  doi = {10.1002/adfm.202513024}
}
Kostenlos starten →