EUVIMEDEUVIMED entdecken
Crossref

Interface‐Compatible Deep Eutectic Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries

Dashan Zhang, Ting Tian, Yu Guo, Jikai Zhang, Junwei An, Jia Hui, Yongzheng Shi, Peter Müller‐Buschbaum, Shubin Yang, Bin Li

Advanced Functional Materials · 2026-03 · 36 (23)

DOI: 10.1002/adfm.202524041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 02.11.2025. Verfasst von Dashan Zhang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Academic Excellence Foundation of BUAA for PHD Students, Inner Mongolia University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer electrolytes (PEs) are attractive due to their lightweight, flexibility, facile processability, and intimate solid–solid contact with electrodes for solid‐state lithium‐metal batteries (LMBs). Unfortunately, their practical application is impeded by insufficient ionic conductivity and an unstable electrolyte/electrode interface. Herein, by integrating a butadiene sulfone‐based deep‐eutectic solvent with a fluorinated polymer matrix (PVDF‐HFP), a deep eutectic polymer electrolyte (DEPE) is developed. It is demonstrated that the butadiene sulfone not only liberates lithium ions from the C‐F dipoles in polymer chains, but also establishes a contact‐ion‐pair‐dominated solvation structure, resulting in the DEPE with a high ionic conductivity of 2.1 × 10 −4 S cm −1 at room‐temperature and a lithium‐ion transference number of 0.64. More importantly, the DEPE exhibits outstanding interface compatibility with both the lithium anode and high‐voltage cathode. Benefiting from the weak adsorption of butadiene sulfone on lithium metal, a robust, LiF‐rich solid electrolyte interface is formed at the anode. In addition, its higher HOMO energy level facilitates the formation of a uniform, ‐SO x ‐rich cathode electrolyte interface on the high‐voltage cathode. As a result, a symmetrical Li||Li cell operates stably for over 1200 h, and full batteries of Li||NCM811 exhibit long‐term cycling stability even at 4.5 V. This study proposes an effective strategy for designing high‐performance PEs, paving the way for the development of high‐voltage, long‐life LMBs.

Förderung

  • National Natural Science Foundation of China
  • Academic Excellence Foundation of BUAA for PHD Students
  • Inner Mongolia University of Science and Technology

Zitieren

APA

Zhang, D., Tian, T., Guo, Y., Zhang, J., An, J., Hui, J., Shi, Y., Müller‐Buschbaum, P., Yang, S., & Li, B. (2026). Interface‐Compatible Deep Eutectic Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries. Advanced Functional Materials, 36(23). https://doi.org/10.1002/adfm.202524041

Vancouver

Zhang D, Tian T, Guo Y, Zhang J, An J, Hui J, et al. Interface‐Compatible Deep Eutectic Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries. Advanced Functional Materials. 2026;36(23). doi:10.1002/adfm.202524041

BibTeX
@article{Zhang2026,
  author = {Zhang, Dashan and Tian, Ting and Guo, Yu and Zhang, Jikai and An, Junwei and Hui, Jia and Shi, Yongzheng and Müller‐Buschbaum, Peter and Yang, Shubin and Li, Bin},
  title = {Interface‐Compatible Deep Eutectic Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {23},
  doi = {10.1002/adfm.202524041}
}
Kostenlos starten →