EUVIMEDEUVIMED entdecken
Crossref

Graphene‐Assisted Interfacial Engineering to Develop Binder‐ and Dispersant‐Free Cast Si Alloy/Nanocarbon Anodes for High‐Performance Li‐Ion Batteries

Joo Hwan Jin, Do Geun Lee, Jung Hoon Kim, Sumin Hong, Seola Lim, Joon Young Cho, Jihee Yoon, Jeongmo Kim, Jong Hwan Park, Joong Tark Han

Advanced Functional Materials · 2025-12 · 35 (52)

DOI: 10.1002/adfm.202511352 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 30.06.2025. Verfasst von Joo Hwan Jin und 9 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: Korea Electrotechnology Research Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highly oxidized nanocarbon materials, capable of being dispersed in aqueous solutions without dispersants, can enable the fabrication of highly conductive electrodes for Li‐ion batteries (LIBs). This paper introduces a novel binder‐free casting approach to enhance the performance of Si‐based anodes in LIBs by incorporating a network of highly oxidized single‐walled carbon nanotubes (Ox‐SWCNTs) and size‐controlled graphene oxide (GO) nanosheets, both dispersed in aqueous solutions without dispersants. LIB anodes are prepared using binder‐free slurries containing a Si alloy, Ox‐SWCNTs, and GO (94.5/5/0.5 wt.%). The addition of 2D GO significantly improves the cycling stability of the anodes, whereas those without GO exhibit reduced capacity owing to poor interfacial stability. The anode stability is further enhanced through deoxygenation and nitrogen doping (5.83%) via chemical reduction with hydrazine fumes. The inorganic‐rich solid‐electrolyte interphase in situ hybridized with N‐doped SWCNTs and reduced GO contributes to a low interfacial resistance (1.15 Ω) after cycling. The resulting anodes exhibit remarkable initial capacities (1100 mAh g −1 ) with stable retention behaviors (82.2% after 100 cycles at 0.5 C) even without binder materials. A LIB full‐cell achieving a high energy density of 418 Wh kg −1 demonstrates the excellent performance of the binder‐free Si‐based anodes.

Förderung

  • Korea Electrotechnology Research Institute

Zitieren

APA

Jin, J. H., Lee, D. G., Kim, J. H., Hong, S., Lim, S., Cho, J. Y., Yoon, J., Kim, J., Park, J. H., & Han, J. T. (2025). Graphene‐Assisted Interfacial Engineering to Develop Binder‐ and Dispersant‐Free Cast Si Alloy/Nanocarbon Anodes for High‐Performance Li‐Ion Batteries. Advanced Functional Materials, 35(52). https://doi.org/10.1002/adfm.202511352

Vancouver

Jin JH, Lee DG, Kim JH, Hong S, Lim S, Cho JY, et al. Graphene‐Assisted Interfacial Engineering to Develop Binder‐ and Dispersant‐Free Cast Si Alloy/Nanocarbon Anodes for High‐Performance Li‐Ion Batteries. Advanced Functional Materials. 2025;35(52). doi:10.1002/adfm.202511352

BibTeX
@article{Jin2025,
  author = {Jin, Joo Hwan and Lee, Do Geun and Kim, Jung Hoon and Hong, Sumin and Lim, Seola and Cho, Joon Young and Yoon, Jihee and Kim, Jeongmo and Park, Jong Hwan and Han, Joong Tark},
  title = {Graphene‐Assisted Interfacial Engineering to Develop Binder‐ and Dispersant‐Free Cast Si Alloy/Nanocarbon Anodes for High‐Performance Li‐Ion Batteries},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {52},
  doi = {10.1002/adfm.202511352}
}
Kostenlos starten →