EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Dispersant‐Free Colloidal and Interfacial Engineering of Si‐Nanocarbon Hybrid Anode Materials for High‐Performance Li‐Ion Batteries

Do Geun Lee, Joon Young Cho, Jung Hoon Kim, Gyeongbeom Ryoo, Jihee Yoon, Ajeong Jo, Min Ho Lee, Jong Hwan Park, Jung‐Keun Yoo, Dong Yun Lee, Jeong‐Hee Choi, Joong Tark Han

Advanced Functional Materials · 2024-03 · 34 (13)

DOI: 10.1002/adfm.202311353 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 28.11.2023. Verfasst von Do Geun Lee und 11 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highly conducting nanomaterials have garnered significant attention owing to their potential application in Li‐ion batteries for stable electrodes. However, concerns persist regarding their dispersion and effective hybridization with active materials. This study reports a novel approach to enhance Si‐based anode materials using less defective graphene oxide (C‐GO) and highly oxidized single‐walled carbon nanotubes (C‐SWCNTs) fabricated using chlorate‐based oxidation. The method involves encapsulating Si alloy (SiA) particles with C‐GO and C‐SWCNTs, eliminating the need for additional additives. Composite structures with lithiophilic N‐doped SWCNTs and highly crystalline reduced C‐GO coatings on SiA surfaces are created through spray drying and subsequent chemical reduction. This unique combination yields high capacities, stable retention behaviors, and remarkable initial capacities (1224 mAh g −1 ) with excellent retention rates (82.3% at 100 cycles, 0.1 C). A LIB full‐cell with a SiA/nanocarbon anode exhibited a high energy density of 350 Wh kg −1 , while maintaining 65% capacity retention after 200 cycles. The findings demonstrate the potential of this hybrid approach, which eliminates the need for other conducting additives while maintaining a minimal binder content (5 wt.%). This study presents a promising approach for enhancing Si‐based anode materials in lithium‐ion batteries, addressing the dispersion and hybridization challenges in nanomaterial‐enabled electrode design.

Zitieren

APA

Lee, D. G., Cho, J. Y., Kim, J. H., Ryoo, G., Yoon, J., Jo, A., Lee, M. H., Park, J. H., Yoo, J., Lee, D. Y., Choi, J., & Han, J. T. (2024). Dispersant‐Free Colloidal and Interfacial Engineering of Si‐Nanocarbon Hybrid Anode Materials for High‐Performance Li‐Ion Batteries. Advanced Functional Materials, 34(13). https://doi.org/10.1002/adfm.202311353

Vancouver

Lee DG, Cho JY, Kim JH, Ryoo G, Yoon J, Jo A, et al. Dispersant‐Free Colloidal and Interfacial Engineering of Si‐Nanocarbon Hybrid Anode Materials for High‐Performance Li‐Ion Batteries. Advanced Functional Materials. 2024;34(13). doi:10.1002/adfm.202311353

BibTeX
@article{Lee2024,
  author = {Lee, Do Geun and Cho, Joon Young and Kim, Jung Hoon and Ryoo, Gyeongbeom and Yoon, Jihee and Jo, Ajeong and Lee, Min Ho and Park, Jong Hwan and Yoo, Jung‐Keun and Lee, Dong Yun and Choi, Jeong‐Hee and Han, Joong Tark},
  title = {Dispersant‐Free Colloidal and Interfacial Engineering of Si‐Nanocarbon Hybrid Anode Materials for High‐Performance Li‐Ion Batteries},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {13},
  doi = {10.1002/adfm.202311353}
}
Kostenlos starten →