EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D‐Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface‐Modified Nanoparticles at Low Loadings

Mirko Maturi, Lorenzo Migliorini, Sara Moon Villa, Tommaso Santaniello, Natalia Fernandez‐Delgado, Sergio Ignacio Molina, Paolo Milani, Alberto Sanz de León, Mauro Comes Franchini

Advanced Functional Materials · 2025-01 · 35 (1)

DOI: 10.1002/adfm.202407077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 23.10.2024. Verfasst von Mirko Maturi und 8 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Junta de Andalucía.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work describes the development and characterization of tetragonal barium titanate nanoparticles (BTO NPs) and their surface functionalization with dopamine dodecylamine (DDA), a lipophilic organic ligand. The so‐obtained lipophilic NPs (BTO‐DDA) are then formulated at low loadings (< 5 wt.%) into liquid photocurable resins for vat photopolymerization (VP) and 3D printed into solid objects. The printed composites are mechanically characterized in order to assess the effect of the nanomaterial on the mechanical properties of the 3D printed polymer, revealing no significant variations in the mechanical properties (tensile or flexural) of the nanocomposites compared to the original polymer matrix. In light of these results, the printed nanocomposites are studied in terms of their capacity to generate a separation of charge by the piezoelectric effect, typical of the BTO crystal structure. This study reveals that BTO‐loaded nanocomposites display outstanding piezoelectric coefficients as high as 50 pC/N when BTO‐DDA is formulated at 3.0 wt.%, only slightly less than one‐third of the piezoelectric coefficient previously reported for bulk BTO, while preserving the mechanical properties of the polymer matrix.

Förderung

  • Junta de Andalucía

Zitieren

APA

Maturi, M., Migliorini, L., Villa, S. M., Santaniello, T., Fernandez‐Delgado, N., Molina, S. I., Milani, P., León, A. S. D., & Franchini, M. C. (2025). 3D‐Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface‐Modified Nanoparticles at Low Loadings. Advanced Functional Materials, 35(1). https://doi.org/10.1002/adfm.202407077

Vancouver

Maturi M, Migliorini L, Villa SM, Santaniello T, Fernandez‐Delgado N, Molina SI, et al. 3D‐Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface‐Modified Nanoparticles at Low Loadings. Advanced Functional Materials. 2025;35(1). doi:10.1002/adfm.202407077

BibTeX
@article{Maturi2025,
  author = {Maturi, Mirko and Migliorini, Lorenzo and Villa, Sara Moon and Santaniello, Tommaso and Fernandez‐Delgado, Natalia and Molina, Sergio Ignacio and Milani, Paolo and León, Alberto Sanz de and Franchini, Mauro Comes},
  title = {3D‐Printing of Highly Piezoelectric Barium Titanate Polymer Nanocomposites with Surface‐Modified Nanoparticles at Low Loadings},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {1},
  doi = {10.1002/adfm.202407077}
}
Kostenlos starten →