EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parameter Optimization for Printing Barium Titanate Piezoelectric Ceramics through Digital Light Processing

Dongcai Zhang, Yaodong Yang iD, Wei-Feng Rao

Micromachines · 29.05.2023 · 14 (6) · 1146

DOI: 10.3390/mi14061146 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.05.2023. Verfasst von Dongcai Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Shandong Institute of Mechanical Design and Research, Qilu University of Technology (Shandong Academy of Sciences)…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital light processing (DLP) technology has emerged as a promising 3D printing technology with the potential for the efficient manufacturing of complex ceramic devices. However, the quality of printed products is highly dependent on various process parameters, including slurry formulation, heat treatment process, and poling process. This paper optimizes the printing process with respect to these key parameters, such as using a ceramic slurry with 75 wt% powder content. The employed degreasing heating rate is 4 °C/min, the carbon-removing heating rate is 4 °C/min, and the sintering heating rate is 2 °C/min for heat treatment of the printed green body. The resulting parts are polarized using a poling field of 10 kV/cm, a poling time of 50 min, and a poling temperature of 60 °C, which yields a piezoelectric device with a high piezoelectric constant of 211 pC/N. To demonstrate the practical application of the device, its use as a force sensor and magnetic sensor is validated.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbarium titanatedigital light processingpiezoelectricity

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Shandong Institute of Mechanical Design and Research, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China.

ORCID-Profile: Yaodong Yang

Förderung

  • National Natural Science Foundation of China
  • National Science Foundation of China

Zitieren

APA

Zhang, D., Yang, Y., & Rao, W. F. (2023). Parameter Optimization for Printing Barium Titanate Piezoelectric Ceramics through Digital Light Processing. Micromachines, 14(6), 1146. https://doi.org/10.3390/mi14061146

Vancouver

Zhang D, Yang Y, Rao WF. Parameter Optimization for Printing Barium Titanate Piezoelectric Ceramics through Digital Light Processing. Micromachines. 2023;14(6):1146. doi:10.3390/mi14061146

BibTeX
@article{Zhang2023,
  author = {Zhang, Dongcai and Yang, Yaodong and Rao, Wei-Feng},
  title = {Parameter Optimization for Printing Barium Titanate Piezoelectric Ceramics through Digital Light Processing},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {6},
  pages = {1146},
  doi = {10.3390/mi14061146}
}
Kostenlos starten →