The Influences of DMF Content in Composite Polymer Electrolytes on Li + ‐Conductivity and Interfacial Stability with Li‐Metal
Advanced Functional Materials · 2023-06 · 33 (25)
DOI: 10.1002/adfm.202301165 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 14.03.2023. Verfasst von Jianxun Zhu und 10 weiteren Autor:innen. Die Arbeit wurde bisher 98-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
Trace N, N‐dimethylformamide(DMF) containing composite polymer electrolytes (CPEs) has attracted much attention owing to the dramatically increased Li + ‐conductivity. But the amount of DMF is critical and needs to be clarified for the interfacial stability, since DMF is easily reduced by Li‐metal. Herein, the influences of DMF in poly(ethylene oxide) (PEO) and poly(vinylidene fluoride) (PVDF) based CPEs are studied on the Li + ‐conductivity and interfacial stability. In PEO‐based CPEs, owing to a stronger interaction of lithium bis(trifluoromethanesulfon)imide (LiTFSI) with PEO than DMF, DMF can not be confined and be easily evaporated off. Only ≈0.25wt.% DMF is absorbed on ceramic electrolyte fillers, giving two times increased Li + ‐conductivity compared with the DMF‐free counterparts and generating stable interface with Li‐metal; but over much DMF (≥2.2 wt.%) leads to serious interfacial reactions with Li‐metal. While in PVDF‐based CPEs, ≈8wt.% DMF is confined by LiTFSI owing to a stronger interaction of LiTFSI with DMF than with PVDF. Short‐term stable interface with Li‐metal can be obtained, but longer‐term cycling or higher current density leads to the gradually aggravated reactions with Li‐metal. Thanks to the high‐voltage stability of PVDF based CPEs, better cycling performance is obtained when they are used as catholytes to match high‐voltage cathodes.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Zhu, J., He, S., Tian, H., Hu, Y., Xin, C., Xie, X., Zhang, L., Gao, J., Hao, S., Zhou, W., & Zhang, L. (2023). The Influences of DMF Content in Composite Polymer Electrolytes on Li + ‐Conductivity and Interfacial Stability with Li‐Metal. Advanced Functional Materials, 33(25). https://doi.org/10.1002/adfm.202301165
Vancouver
Zhu J, He S, Tian H, Hu Y, Xin C, Xie X, et al. The Influences of DMF Content in Composite Polymer Electrolytes on Li + ‐Conductivity and Interfacial Stability with Li‐Metal. Advanced Functional Materials. 2023;33(25). doi:10.1002/adfm.202301165
BibTeX
@article{Zhu2023,
author = {Zhu, Jianxun and He, Shuang and Tian, Huayang and Hu, Yiming and Xin, Chen and Xie, Xiaoxin and Zhang, Lipeng and Gao, Jian and Hao, Shu‐Meng and Zhou, Weidong and Zhang, Liqun},
title = {The Influences of DMF Content in Composite Polymer Electrolytes on Li + ‐Conductivity and Interfacial Stability with Li‐Metal},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {25},
doi = {10.1002/adfm.202301165}
}
EUVIMED