Integration of an Axially Continuous Graphene with Functional Metals for High‐Temperature Electrical Conductors
Advanced Functional Materials · 2023-08 · 33 (35)
DOI: 10.1002/adfm.202214220 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 12.05.2023. Verfasst von Hamzeh Kashani und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: Office of Naval Research.
Abstract (Originalsprache)
Demands for effective high‐temperature electrical conductors continue to increase with the rapid adoption of electric vehicles. However, the use of conventional copper‐based conductors is limited to relatively low temperatures due to their poor oxidation resistance and microstructural instability. Here, a highly conductive and thermally stable nickel‐graphene‐copper (NiGCu) wire that combines the advantages of graphene and its metallic components is developed. The NiGCu wire consists of a conductive copper core, an oxidation‐resistant nickel shell, and axially continuous graphene embedded between them. The experiments on 10–80 µm diameter NiGCu wires demonstrate substantial enhancements in electrical properties and thermal stability across a variety of metrics. For instance, the smallest NiGCu wires have a 61.2% higher current density limit, 307.6% higher conductivity, and an order of magnitude smaller change in resistivity compared to conventional Ni‐coated Cu counterparts after annealing at 650 °C. By performing both innovative experiments and simulations using different sizes of NiGCu wires, the diffusion coefficients of metals are quantified, for the first time to the best knowledge, through continuous graphene. These results indicate that the dramatic improvement in thermo‐electrical properties is enabled by the embedded graphene layer which reduces NiCu interdiffusion by ≈10 4 times at 550 °C and 650 °C.
Förderung
- Office of Naval Research
Zitieren
APA
Kashani, H., Choi, W. J., Kim, C., Berlia, R., Rajagopalan, J., & Kang, W. (2023). Integration of an Axially Continuous Graphene with Functional Metals for High‐Temperature Electrical Conductors. Advanced Functional Materials, 33(35). https://doi.org/10.1002/adfm.202214220
Vancouver
Kashani H, Choi WJ, Kim C, Berlia R, Rajagopalan J, Kang W. Integration of an Axially Continuous Graphene with Functional Metals for High‐Temperature Electrical Conductors. Advanced Functional Materials. 2023;33(35). doi:10.1002/adfm.202214220
BibTeX
@article{Kashani2023,
author = {Kashani, Hamzeh and Choi, Won June and Kim, Chunghwan and Berlia, Rohit and Rajagopalan, Jagannathan and Kang, Wonmo},
title = {Integration of an Axially Continuous Graphene with Functional Metals for High‐Temperature Electrical Conductors},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {35},
doi = {10.1002/adfm.202214220}
}
EUVIMED