Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation
Advanced Engineering Materials · 16.11.2026
DOI: 10.1002/adem.71431 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 16.11.2026. Verfasst von Shuke He und 2 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Gefördert von: Liaoning Revitalization Talents Program.
Abstract (Originalsprache)
In this study, dense Cr–Nb and Cr–V binary composite carbide layers were successfully fabricated on GCr15 steel via the powder pack cementation technique, and the microstructure, mechanical properties, and dry sliding wear behaviors of the composite carbide layers were investigated. The results show that the as‐prepared composite carbide layers are mainly composed of (Cr, Fe) 7 C 3 . All the composite carbide layers have a thickness of more than 16 μm and a microhardness higher than 1500 HV 0. 3 . The Cr–Nb composite carbide layer exhibits excellent toughness, with the optimal bonding strength grade reaching HF1; the Cr–V composite carbide layer exhibits higher bonding strength, with its critical failure load LC 2 exceeding 40 N. As the Cr–Fe content decreases and the Nb–Fe/V–Fe content increases, the specific wear rate of the composite carbide layers shows a decreasing trend. Based on the analysis of the worn surface morphology and phase composition, it is found that under the relatively high load of 30 N, corundum‐type composite oxides, spinel‐type composite oxides, and graphite‐like structures are readily formed in situ at the friction interface. These products play a self‐lubricating role during the sliding process, thereby effectively reducing friction and wear.
Förderung
- Liaoning Revitalization Talents Program
Zitieren
APA
He, S., Shang, J., & Liu, M. L. (2026). Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation. Advanced Engineering Materials. https://doi.org/10.1002/adem.71431
Vancouver
He S, Shang J, Liu ML. Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation. Advanced Engineering Materials. 2026. doi:10.1002/adem.71431
BibTeX
@article{He2026,
author = {He, Shuke and Shang, Jian and Liu, Mei ling},
title = {Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation},
journal = {Advanced Engineering Materials},
year = {2026},
doi = {10.1002/adem.71431}
}
EUVIMED