EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Microstructure and Properties of CoCrFeNi/WC-Nb HEA Composite Coating Prepared by Laser Cladding

Haihong Fan, Zijian Liu, Haomu Zhu, Liancai Pang, Jiang Huang iD

Materials · 04.07.2026 · 19 (13) · 2866

DOI: 10.3390/ma19132866 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.07.2026. Verfasst von Haihong Fan und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Electronics and Information Engineering, Guangdong Ocean University, Zhanjiang 524088, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Provincial Key Laboratory of Intelligent Equipment for South China Sea Marine Ranching, Guangdong Ocean University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CoCrFeNi/WC-Nb high-entropy alloy (HEA) composite coating was prepared on the surface of Q235 steel by LC (laser cladding) technology, and the effects of WC and in situ NbC reinforcement on the coating were studied. The phase composition, phase characteristics, microhardness, and wear resistance of the cladding coatings were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), friction and wear tester, and X-ray photoelectron spectroscopy (XPS), and the corrosion resistance was tested by a three-electrode electrochemical workstation. The results show that the CoCrFeNi/WC-Nb HEA coating consists of FCC, WC, NbC, and Laves phases, and the reinforcing phase causes grain refinement and lattice distortion. The microhardness reached (418.29 ± 16.72) HV, which was about 2.64-times higher than that of the CoCrFeNi HEA coating. The wear rate decreased to (1.150 ± 0.11) × 10−4 mm3N−1m−1, which was about 0.25 times that of the CoCrFeNi HEA coating, and the wear of the coating changed from abrasive wear to adhesive wear. The corrosion current density and corrosion voltage of the CoCrFeNi/WC-Nb HEA coating are (3.3820 ± 0.2103) × 10−6 A/cm2 and −(0.7650 ± 0.0850) V, respectively.

Schlagwörter

Stichwörter der Autor:innen

HEAcorrosion resistancein situ reactionlaser claddingmicrostructurewear resistance

Autor:innen und Institutionen

  • College of Electronics and Information Engineering, Guangdong Ocean University, Zhanjiang 524088, China.
  • Guangdong Provincial Key Laboratory of Intelligent Equipment for South China Sea Marine Ranching, Guangdong Ocean University, Zhanjiang 524088, China.

ORCID-Profile: Jiang Huang

Förderung

  • Guangdong Provincial Key Laboratory of Intelligent Equipment for South China Sea Marine Ranching
  • Guangdong Ocean University

Zitieren

APA

Fan, H., Liu, Z., Zhu, H., Pang, L., & Huang, J. (2026). The Microstructure and Properties of CoCrFeNi/WC-Nb HEA Composite Coating Prepared by Laser Cladding. Materials, 19(13), 2866. https://doi.org/10.3390/ma19132866

Vancouver

Fan H, Liu Z, Zhu H, Pang L, Huang J. The Microstructure and Properties of CoCrFeNi/WC-Nb HEA Composite Coating Prepared by Laser Cladding. Materials. 2026;19(13):2866. doi:10.3390/ma19132866

BibTeX
@article{Fan2026,
  author = {Fan, Haihong and Liu, Zijian and Zhu, Haomu and Pang, Liancai and Huang, Jiang},
  title = {The Microstructure and Properties of CoCrFeNi/WC-Nb HEA Composite Coating Prepared by Laser Cladding},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2866},
  doi = {10.3390/ma19132866}
}
Kostenlos starten →