EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Metal–Carbon Ink for Printed Stretchable Temperature Sensors

Makara Lay, Xue Bai, Thomas Kister, Tobias Kraus

Advanced Engineering Materials · 19.08.2026 · 28 (16)

DOI: 10.1002/adem.71060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 30.06.2026. Verfasst von Makara Lay und 3 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive polymer composites for printed stretchable temperature sensors must remain functional during many strain cycles despite unavoidable changes in their microstructure and thus the electrically conductive network. In this study, we introduce screen‐printable inks with electrical conductivities and temperature coefficients of resistance (TCR, α ) that are suitable for application in temperature sensors while retaining thermal and mechanical stability upon stretching the printed sensors. Silver flakes (AgF) and carbon black (CB) or graphite flakes (GR) at different ratios were combined as conductive fillers in dragon skin (DS) elastomer and screen printed. Their electrothermal properties were characterized within the temperature range of 20°C–120°C. Samples with constant α in suitable ranges were selected and characterized electrically for stability during thermal cycling and mechanically during 30 000 strain cycling. The DS‐AgF‐CB12‐180°C and DS‐AgF‐GR10‐180°C composites exhibited linear resistance changes with α = 2.29 × 10 −3 /°C and 1.75 × 10 −3 /°C, respectively. The resistance of DS‐AgF‐GR drifted below 2% over 10 thermal cycling and relative resistance changes ( R/R 0 ) increased up to 8 after 30 000 strain cycling at 0%–10%. We show that the carbon particles modify the metal–matrix interactions in the hybrid composites, thus increasing stability and reliability of temperature sensing.

Zitieren

APA

Lay, M., Bai, X., Kister, T., & Kraus, T. (2026). Hybrid Metal–Carbon Ink for Printed Stretchable Temperature Sensors. Advanced Engineering Materials, 28(16). https://doi.org/10.1002/adem.71060

Vancouver

Lay M, Bai X, Kister T, Kraus T. Hybrid Metal–Carbon Ink for Printed Stretchable Temperature Sensors. Advanced Engineering Materials. 2026;28(16). doi:10.1002/adem.71060

BibTeX
@article{Lay2026,
  author = {Lay, Makara and Bai, Xue and Kister, Thomas and Kraus, Tobias},
  title = {Hybrid Metal–Carbon Ink for Printed Stretchable Temperature Sensors},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {16},
  doi = {10.1002/adem.71060}
}
Kostenlos starten →