EUVIMEDEUVIMED entdecken
Crossref

Effect of Transition Element Co on the Microstructure, Wear Resistance, and Oxidation Resistance of AlNbMoTa 0.5 Co x Laser‐Clad Coatings

Shushuai Liu, Jianfeng Wang, Guanlin Zhao, Xinhong Wang

Advanced Engineering Materials · 22.07.2026 · 28 (14)

DOI: 10.1002/adem.202503071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 30.04.2026. Verfasst von Shushuai Liu und 3 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AlNbMoTa 0.5 Co x coatings were successfully prepared on a titanium alloy substrate using laser cladding. The lattice distortion is particularly pronounced when the Co content is low. With a melting point significantly lower than that of the high‐melting‐point principal elements, Co segregates in the inter‐dendritic regions of the BCC solid solution. The size of these inter‐dendritic spaces gradually increases with higher Co content. Furthermore, Co forms a solid solution structure primarily composed of Co‐Al‐Ti with a Co‐HCP crystal structure in the inter‐dendritic areas. The addition of a small amount of Co leads to a significant decrease in the toughness of the clad coating, resulting in poorer wear resistance at room temperature. The wear resistance at room temperature slightly improves due to grain refinement. In terms of high‐temperature performance, the element Co enhances the high‐temperature properties of the coating by slowing down the oxidation rate of the dendritic constituent Ti. On the one hand, it improves the high‐temperature wear resistance of the clad coating by forming a thinner self‐lubricating layer on the worn surface. On the other hand, under high‐temperature oxidation erosion, it slows down the oxidation rate of the dendritic constituent Ti, thereby improving the high‐temperature oxidation resistance of the clad coating.

Zitieren

APA

Liu, S., Wang, J., Zhao, G., & Wang, X. (2026). Effect of Transition Element Co on the Microstructure, Wear Resistance, and Oxidation Resistance of AlNbMoTa 0.5 Co x Laser‐Clad Coatings. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.202503071

Vancouver

Liu S, Wang J, Zhao G, Wang X. Effect of Transition Element Co on the Microstructure, Wear Resistance, and Oxidation Resistance of AlNbMoTa 0.5 Co x Laser‐Clad Coatings. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.202503071

BibTeX
@article{Liu2026,
  author = {Liu, Shushuai and Wang, Jianfeng and Zhao, Guanlin and Wang, Xinhong},
  title = {Effect of Transition Element Co on the Microstructure, Wear Resistance, and Oxidation Resistance of AlNbMoTa 0.5 Co x Laser‐Clad Coatings},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {14},
  doi = {10.1002/adem.202503071}
}
Kostenlos starten →