EUVIMEDEUVIMED entdecken
Crossref

Additive Manufacturing of GNP‐Enriched Copper Feedstock via Bound Metal Deposition

Matteo Mariani, Maria Elisa Tata, Girolamo Costanza, Francesca Nanni, Elisa Pizzi, Mario Bragaglia

Advanced Engineering Materials · 19.08.2026 · 28 (16)

DOI: 10.1002/adem.202502758 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 22.06.2026. Verfasst von Matteo Mariani und 5 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a copper–graphene nanoplatelet (Cu–GNP) feedstock was developed and processed via bound metal deposition (BMD) to produce dense copper metallic parts. Rheological analyses showed that the addition of GNPs reduced the melt viscosity across the 160°C–250°C range, ensuring stable extrusion and smooth layer deposition. After solvent and thermal debinding, sintering was performed at 1050°C. The sintered samples exhibited a 92% densification relative to bulk copper, and a linear shrinkage of ∼17%–18% along all directions. The microstructure showed equiaxed grains with an average size of 23 ± 5 µm. Mechanical tests revealed an elastic modulus of 100 ± 2 GPa, yield strength of 24.6 ± 1.8 MPa, ultimate tensile strength of 62.4 ± 0.8 MPa, elongation at break of 10.8 ± 1.6%, and Vickers hardness of 22.3 HV. The electrical conductivity is 42.5 × 10 6 S/m, leading to a thermal conductivity of 311.5 W/m K (from the Wiedemann–Franz law). A proof‐of‐concept 3D printed cooling fin is also presented.

Zitieren

APA

Mariani, M., Tata, M. E., Costanza, G., Nanni, F., Pizzi, E., & Bragaglia, M. (2026). Additive Manufacturing of GNP‐Enriched Copper Feedstock via Bound Metal Deposition. Advanced Engineering Materials, 28(16). https://doi.org/10.1002/adem.202502758

Vancouver

Mariani M, Tata ME, Costanza G, Nanni F, Pizzi E, Bragaglia M. Additive Manufacturing of GNP‐Enriched Copper Feedstock via Bound Metal Deposition. Advanced Engineering Materials. 2026;28(16). doi:10.1002/adem.202502758

BibTeX
@article{Mariani2026,
  author = {Mariani, Matteo and Tata, Maria Elisa and Costanza, Girolamo and Nanni, Francesca and Pizzi, Elisa and Bragaglia, Mario},
  title = {Additive Manufacturing of GNP‐Enriched Copper Feedstock via Bound Metal Deposition},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {16},
  doi = {10.1002/adem.202502758}
}
Kostenlos starten →