EUVIMEDEUVIMED entdecken
Crossref

Material extrusion additive manufacturing of 17-4PH stainless steel via bound metal deposition: Densification, microstructures, and tensile properties

Haruka Shima, Kenta Yamanaka, Manami Mori, Chengli Yuan, Kenji Nitta, Akihiko Chiba

Engineering Science in Additive Manufacturing · 12.06.2026 · 2 (2) · 026120006

DOI: 10.36922/esam026120006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Science in Additive Manufacturing, online erschienen am 12.06.2026. Verfasst von Haruka Shima und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal material extrusion, which is based on debinding and subsequent sintering of 3D-printed green bodies, is gaining attention as a low-cost additive manufacturing process. In this study, we comprehensively examined the densification behavior, microstructure, and tensile properties of 17-4PH stainless steel prepared using bound metal deposition (BMD). The specimens were fabricated in the standard and dense modes, with the latter programmed to apply a higher extrusion pressure. The dense mode resulted in a relative density of approximately 98%, surpassing the 95% achieved in the standard mode. We investigated the impact of the build angle (0° or 90°) relative to the build direction (BD) and various printing parameters, including the specimen thickness, hatch spacing, print speed, and nozzle temperature, on the relative density and tensile properties. The results highlight the crucial role of the build angle in determining the tensile properties, leading to mechanical anisotropy. X-ray computed tomography captured linear printing defects aligned perpendicular to the BD, which contributed to premature fractures during tensile loading along the BD. The as-sintered microstructures contained α- and δ-ferrite with spherical nanoscale copper precipitates. The solution-treated and subsequently aged H900 specimens exhibited strength levels comparable to or superior to those of their wrought counterparts. These findings provide fundamental insights into the production of industrial parts using BMD.

Zitieren

APA

Shima, H., Yamanaka, K., Mori, M., Yuan, C., Nitta, K., & Chiba, A. (2026). Material extrusion additive manufacturing of 17-4PH stainless steel via bound metal deposition: Densification, microstructures, and tensile properties. Engineering Science in Additive Manufacturing, 2(2), 026120006. https://doi.org/10.36922/esam026120006

Vancouver

Shima H, Yamanaka K, Mori M, Yuan C, Nitta K, Chiba A. Material extrusion additive manufacturing of 17-4PH stainless steel via bound metal deposition: Densification, microstructures, and tensile properties. Engineering Science in Additive Manufacturing. 2026;2(2):026120006. doi:10.36922/esam026120006

BibTeX
@article{Shima2026,
  author = {Shima, Haruka and Yamanaka, Kenta and Mori, Manami and Yuan, Chengli and Nitta, Kenji and Chiba, Akihiko},
  title = {Material extrusion additive manufacturing of 17-4PH stainless steel via bound metal deposition: Densification, microstructures, and tensile properties},
  journal = {Engineering Science in Additive Manufacturing},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {026120006},
  doi = {10.36922/esam026120006}
}
Kostenlos starten →