EUVIMEDEUVIMED entdecken
Crossref

Microstructure and Enhanced Mechanical Properties of Al 2 O 3 /Al 2 O 3 Composite Densified via Sol‐Gel Method

Xun Zhou, Ye Liu, Wenli Zhong, Jian Zhang, Wei Zeng, Ruyi Xu, Ru Jiang

Advanced Engineering Materials · 18.03.2026 · 28 (6)

DOI: 10.1002/adem.202502510 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 08.02.2026. Verfasst von Xun Zhou und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: Natural Science Foundation of Hunan Province, National Science and Technology Major Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There is a trade‐off between the fiber‐ and matrix‐dominated mechanical properties of the alumina‐fiber‐reinforced alumina ceramic matrix (Al 2 O 3 /Al 2 O 3 ) composites, which have two‐dimensional fiber fabrics and porous matrix. In this work, a novel Al 2 O 3 sol was used to densify the Al 2 O 3 /Al 2 O 3 composites. The thermal evolution of the Al 2 O 3 sol as well as the microstructures and mechanical properties of the Al 2 O 3 /Al 2 O 3 composite were investigated. The sol exhibited a low phase‐transition temperature: α‐ Al 2 O 3 appeared at 1000°C and became fully developed at 1100°C. After densification, the composite density increased from 3.01 ± 0.07 to 3.18 ± 0.01 g/cm 3 , and the matrix hardness increased from 2.6 ± 0.2 to 4.2 ± 0.2 GPa. The sol densified Al 2 O 3 /Al 2 O 3 composites displayed high flexural strength of 453.4 ± 32.4 MPa, and high interlaminar shear strength of 30.3 ± 0.7 MPa, which were 53.5% and 98.0% greater than those of the as‐fabricated Al 2 O 3 /Al 2 O 3 composite. Mechanistically, sol‐derived nanoscale alumina particles fill residual pores/microcracks, densifying the matrix and improving load transfer. The fiber/matrix contact tightens but remains weakly bonded, promoting crack deflection and suppressing delamination. These findings suggest that the balance between the fiber‐ and matrix‐dominated mechanical properties of the Al 2 O 3 /Al 2 O 3 composites can be achieved by the Al 2 O 3 sol densification.

Förderung

  • Natural Science Foundation of Hunan Province
  • National Science and Technology Major Project

Zitieren

APA

Zhou, X., Liu, Y., Zhong, W., Zhang, J., Zeng, W., Xu, R., & Jiang, R. (2026). Microstructure and Enhanced Mechanical Properties of Al 2 O 3 /Al 2 O 3 Composite Densified via Sol‐Gel Method. Advanced Engineering Materials, 28(6). https://doi.org/10.1002/adem.202502510

Vancouver

Zhou X, Liu Y, Zhong W, Zhang J, Zeng W, Xu R, et al. Microstructure and Enhanced Mechanical Properties of Al 2 O 3 /Al 2 O 3 Composite Densified via Sol‐Gel Method. Advanced Engineering Materials. 2026;28(6). doi:10.1002/adem.202502510

BibTeX
@article{Zhou2026,
  author = {Zhou, Xun and Liu, Ye and Zhong, Wenli and Zhang, Jian and Zeng, Wei and Xu, Ruyi and Jiang, Ru},
  title = {Microstructure and Enhanced Mechanical Properties of Al 2 O 3 /Al 2 O 3 Composite Densified via Sol‐Gel Method},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {6},
  doi = {10.1002/adem.202502510}
}
Kostenlos starten →