EUVIMEDEUVIMED entdecken
Crossref

A Low Modulus and High Strength Dual‐Phase Ti–Ta Alloy Manufactured by Laser Powder Bed Fusion

Desheng Li, Qilin Zhong, Huanrong Xie, Cijun Shuai, Chengde Gao

Advanced Engineering Materials · 22.04.2026 · 28 (8)

DOI: 10.1002/adem.202502492 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 17.03.2026. Verfasst von Desheng Li und 4 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Hunan Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti alloys have emerged as promising candidates for biomedical implants owing to the favorable biocompatibility and corrosion resistance. Nevertheless, the inadaptability of elastic modulus between Ti‐based implants and human bones would trigger stress‐shielding effect, thus causing implant loosening or failure. In this study, α + β dual‐phase structure was in situ constructed in Ti–Ta alloys by manipulating LPBF process. The as‐printed Ti–Ta alloys were fabricated using optimized process parameters, hence exhibiting satisfactory manufacturing quality. This was because moderate laser power promoted Marangoni convection flow and thereby enabled the melt to fill gaps between adjacent laser tracks, while relatively low scanning speeds refrained Plateau–Rayleigh instability and further facilitated the formation of continuous molten pool. Furthermore, extremely high temperature gradient and transient solidification nature of LPBF suppressed the β → α transformation, further constructing α + β dual‐phase structure which contributed to a low modulus of 74.5 GPa. Meanwhile, dislocation pile‐ups, moderate sliding and localized rotation in grains contributed to enhanced strength (1143.4 MPa) without sacrificing ductility (10.6%) in Ti–Ta alloys. Overall, this study not only provides a maneuverable paradigm to manufacture dual‐phase Ti alloys with low modulus and high strength but also sheds light on developing and extending cutting‐edge implant applications.

Förderung

  • National Natural Science Foundation of China
  • Hunan Provincial Natural Science Foundation

Zitieren

APA

Li, D., Zhong, Q., Xie, H., Shuai, C., & Gao, C. (2026). A Low Modulus and High Strength Dual‐Phase Ti–Ta Alloy Manufactured by Laser Powder Bed Fusion. Advanced Engineering Materials, 28(8). https://doi.org/10.1002/adem.202502492

Vancouver

Li D, Zhong Q, Xie H, Shuai C, Gao C. A Low Modulus and High Strength Dual‐Phase Ti–Ta Alloy Manufactured by Laser Powder Bed Fusion. Advanced Engineering Materials. 2026;28(8). doi:10.1002/adem.202502492

BibTeX
@article{Li2026,
  author = {Li, Desheng and Zhong, Qilin and Xie, Huanrong and Shuai, Cijun and Gao, Chengde},
  title = {A Low Modulus and High Strength Dual‐Phase Ti–Ta Alloy Manufactured by Laser Powder Bed Fusion},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {8},
  doi = {10.1002/adem.202502492}
}
Kostenlos starten →