Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion
Materials · 09.03.2023 · 16 (6) · 2208
DOI: 10.3390/ma16062208 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.03.2023. Verfasst von Mu Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: General Program of Science and Technology Development Project of Beijing Municipal Education Commission, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Titanium-tantalum (Ti-Ta) alloy has excellent biomechanical properties with high strength and low Young’s modulus, showing great application potential in the biomedical industry. In this study, Ti-Ta alloy samples were prepared by laser powder bed fusion (LPBF) technology with mixed pure 75 wt.% Ti and 25 wt.% Ta powders as the feedstock. The maximum relative density of Ti-Ta samples prepared by LPBF reached 99.9%. It is well-accepted that four nonequilibrium phases, namely, α′, α″ and metastable β phase exist in Ti-Ta alloys. The structure of α′, α″ and β are hexagonal close-packed (HCP), base-centered orthorhombic (BCO) and body-centered cubic (BCC), respectively. X-ray Diffraction (XRD) analysis showed that the α′ phase transformed to the α″ phase with the increase of energy density. The lamellar α′/α″ phases and the α″ twins were generated in the prior β phase. The microstructure and mechanical properties of the Ti-Ta alloy were optimized with different LPBF processing parameters. The samples prepared by LPBF energy density of 381 J/mm3 had a favorable ultimate strength (UTS) of 1076 ± 2 MPa and yield strength of 795 ± 16 MPa. The samples prepared by LPBF energy density of 76 had excellent ductility, with an elongation of 31% at fracture.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China.
- Beijing Engineering Research Center of Eco-Materials and LCA, Beijing 100124, China.
ORCID-Profile: Dingyong He, Li Cui, Xingye Guo
Förderung
- General Program of Science and Technology Development Project of Beijing Municipal Education Commission
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Gao, M., He, D., Cui, L., Ma, L., Tan, Z., Zhou, Z., & Guo, X. (2023). Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion. Materials, 16(6), 2208. https://doi.org/10.3390/ma16062208
Vancouver
Gao M, He D, Cui L, Ma L, Tan Z, Zhou Z, et al. Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion. Materials. 2023;16(6):2208. doi:10.3390/ma16062208
BibTeX
@article{Gao2023,
author = {Gao, Mu and He, Dingyong and Cui, Li and Ma, Lixia and Tan, Zhen and Zhou, Zheng and Guo, Xingye},
title = {Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion},
journal = {Materials},
year = {2023},
volume = {16},
number = {6},
pages = {2208},
doi = {10.3390/ma16062208}
}
EUVIMED