EUVIMEDEUVIMED entdecken
Crossref

Gradient Design Enhances Energy Absorption of 3D‐Printed Bio‐Inspired Functionally Graded Honeycombs

Zhen Huang, Guiling Wei, Zihan Zhang, Junjie Wang, Yuan Chen, Haiqing Liu

Advanced Engineering Materials · 04.03.2026 · 28 (5)

DOI: 10.1002/adem.202502366 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 31.01.2026. Verfasst von Zhen Huang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Functionally graded structures are prevalent in nature and recognized for their excellent mechanical properties. Inspired by this, this article proposed a novel bio‐inspired functionally graded honeycomb (FGH) with varying wall thickness, fabricated by 3D printing, to enhance structural energy absorption under bending loads. First, a finite element model incorporating the elastic‐plastic behavior, damage, and failure of the FGH was developed and validated against three‐point bending tests. Subsequently, the effects of gradient pattern, gradient ratio ( n ), and maximum wall thickness ( t max ) on the energy absorption performance of FGH were systematically investigated using statistical methods. The results indicated that the ascending gradient pattern (A‐FGH) exhibits significant potential for enhancing energy absorption. Furthermore, the gradient ratio exerted a more pronounced influence on the energy absorption of A‐FGH than the maximum wall thickness. Response Surface Methodology (RSM) surrogate model and the Nondominated Sorting Genetic Algorithm II (NSGA‐II) were used to simultaneously maximize specific energy absorption (SEA) and minimize peak force ( F max ) of FGHs. The optimized FGH ( n = 2.15, t max = 3.17 mm) exhibited a remarkable 51.9% enhancement in SEA compared to uniform honeycomb (UH) without an excessive increase in F max .

Zitieren

APA

Huang, Z., Wei, G., Zhang, Z., Wang, J., Chen, Y., & Liu, H. (2026). Gradient Design Enhances Energy Absorption of 3D‐Printed Bio‐Inspired Functionally Graded Honeycombs. Advanced Engineering Materials, 28(5). https://doi.org/10.1002/adem.202502366

Vancouver

Huang Z, Wei G, Zhang Z, Wang J, Chen Y, Liu H. Gradient Design Enhances Energy Absorption of 3D‐Printed Bio‐Inspired Functionally Graded Honeycombs. Advanced Engineering Materials. 2026;28(5). doi:10.1002/adem.202502366

BibTeX
@article{Huang2026,
  author = {Huang, Zhen and Wei, Guiling and Zhang, Zihan and Wang, Junjie and Chen, Yuan and Liu, Haiqing},
  title = {Gradient Design Enhances Energy Absorption of 3D‐Printed Bio‐Inspired Functionally Graded Honeycombs},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {5},
  doi = {10.1002/adem.202502366}
}
Kostenlos starten →