EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High‐Pressure Synthesis of Amorphous Si 3 N 4 and SiBN‐Based Monoliths without Sintering Additives

Wei Li, Shuailing Ma, Siwen Cui, Jingxue Ding, Marc Widenmeyer, Xiaoqi Zhang, Ying Zhan, Zhaoju Yu, Jiarong Cheng, Pinwen Zhu, Tian Cui, Anke Weidenkaff und 1 weitere

Advanced Engineering Materials · 2024-08 · 26 (16)

DOI: 10.1002/adem.202400677 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 24.06.2024. Verfasst von Wei Li und 12 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province, Jilin University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Amorphous Si 3 N 4 and SiBN monoliths without sintering additives are successfully prepared by high‐pressure–low‐temperature (HPLT) sintering using the single‐source‐precursor‐derived amorphous Si 3 N 4 and SiBN powders as raw materials. The microstructural evolution and crystallization behavior of the as‐prepared samples are investigated using scanning electron and transmission electron microscopy and X‐ray powder diffraction, respectively. The results show that the incorporation of boron in the Si–N network enhances the crystallization temperature up to 1200 °C. The Vickers’ hardness of the HPLT‐sintered Si 3 N 4 sample amounts ≈11.6 GPa whether prepared at 1000 or 1200 °C, while the maximum hardness of the SiBN sample is up to 16.3 GPa. The fracture toughness of amorphous Si 3 N 4 and SiBN5 samples is almost identical (around 2.5 MPa m 1/2 ) whether prepared at 1000 or 1200 °C, and SiBN2 and SiBN5 samples show an improved fracture toughness. In addition, the oxidation resistance of the as‐prepared samples is investigated at temperatures up to 1000 °C. A comparison between amorphous Si 3 N 4 and SiBN monoliths demonstrates a positive effect of the presence of boron on their oxidation resistance.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province
  • Jilin University

Zitieren

APA

Li, W., Ma, S., Cui, S., Ding, J., Widenmeyer, M., Zhang, X., Zhan, Y., Yu, Z., Cheng, J., Zhu, P., Cui, T., Weidenkaff, A., & Riedel, R. (2024). High‐Pressure Synthesis of Amorphous Si 3 N 4 and SiBN‐Based Monoliths without Sintering Additives. Advanced Engineering Materials, 26(16). https://doi.org/10.1002/adem.202400677

Vancouver

Li W, Ma S, Cui S, Ding J, Widenmeyer M, Zhang X, et al. High‐Pressure Synthesis of Amorphous Si 3 N 4 and SiBN‐Based Monoliths without Sintering Additives. Advanced Engineering Materials. 2024;26(16). doi:10.1002/adem.202400677

BibTeX
@article{Li2024,
  author = {Li, Wei and Ma, Shuailing and Cui, Siwen and Ding, Jingxue and Widenmeyer, Marc and Zhang, Xiaoqi and Zhan, Ying and Yu, Zhaoju and Cheng, Jiarong and Zhu, Pinwen and Cui, Tian and Weidenkaff, Anke and Riedel, Ralf},
  title = {High‐Pressure Synthesis of Amorphous Si 3 N 4 and SiBN‐Based Monoliths without Sintering Additives},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {16},
  doi = {10.1002/adem.202400677}
}
Kostenlos starten →