EUVIMEDEUVIMED entdecken
Crossref

Preparation of Si 3 N 4 ceramics with enhanced thermal conductivity and mechanical properties using nitride sintering additives

Binbin Fan, Wei Sun, Zunlan Hu, Dengke Zhao, Bohan Wang, Shuo Zhao, Shijia Zhang, Fei Li, Zhipeng Xie, Kexin Chen, Guanghua Liu

International Journal of Applied Ceramic Technology · 2025-09 · 22 (5)

DOI: 10.1111/ijac.15182 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 29.05.2025. Verfasst von Binbin Fan und 10 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Si 3 N 4 ceramics with enhanced thermal conductivity and mechanical properties were prepared by using nitride sintering additives of YN and MgSiN 2 . In addition to the conventional oxide sintering additives such as Y 2 O 3 and MgO, the use of nitride sintering additives offered more possibilities for the optimization of the microstructure and properties of Si 3 N 4 ceramics. The Si 3 N 4 sample with binary nitride additives of YN‒MgSiN 2 showed a coarse‐grained microstructure and the maximum thermal conductivity of 112 W m −1 K −1 after heat treatment. However, the binary nitride additives were insufficient to supply sufficient liquid phase during the sintering of Si 3 N 4 ceramics, which caused porosity and impaired the mechanical properties. A good balance between thermal conductivity and mechanical properties was achieved by using nitride‐oxide hybrid sintering additives of YN‒MgO, where the Si 3 N 4 sample showed both high thermal conductivity of 109 W m⁻ 1 K⁻ 1 and good mechanical properties with flexural strength of 707 ± 7 MPa, fracture toughness of 9.5 ± 0.2 MPa m 1/2 , and Vickers hardness of 14.9 ± 1 GPa.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Fan, B., Sun, W., Hu, Z., Zhao, D., Wang, B., Zhao, S., Zhang, S., Li, F., Xie, Z., Chen, K., & Liu, G. (2025). Preparation of Si 3 N 4 ceramics with enhanced thermal conductivity and mechanical properties using nitride sintering additives. International Journal of Applied Ceramic Technology, 22(5). https://doi.org/10.1111/ijac.15182

Vancouver

Fan B, Sun W, Hu Z, Zhao D, Wang B, Zhao S, et al. Preparation of Si 3 N 4 ceramics with enhanced thermal conductivity and mechanical properties using nitride sintering additives. International Journal of Applied Ceramic Technology. 2025;22(5). doi:10.1111/ijac.15182

BibTeX
@article{Fan2025,
  author = {Fan, Binbin and Sun, Wei and Hu, Zunlan and Zhao, Dengke and Wang, Bohan and Zhao, Shuo and Zhang, Shijia and Li, Fei and Xie, Zhipeng and Chen, Kexin and Liu, Guanghua},
  title = {Preparation of Si 3 N 4 ceramics with enhanced thermal conductivity and mechanical properties using nitride sintering additives},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2025},
  volume = {22},
  number = {5},
  doi = {10.1111/ijac.15182}
}
Kostenlos starten →