EUVIMEDEUVIMED entdecken
Crossref

Infusible Thermoplastic Composites for Wind Turbine Blade Manufacturing: Fatigue Life of Thermoplastic Laminates under Ambient and Low‐Temperature Conditions

Dylan S. Cousins, Zach Arwood, Stephen Young, Brandon Hinkle, David Snowberg, Dayakar Penumadu, Aaron P. Stebner

Advanced Engineering Materials · 2023-06 · 25 (11)

DOI: 10.1002/adem.202201941 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 18.03.2023. Verfasst von Dylan S. Cousins und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditionally, thermoset resins such as polyesters (PE) and epoxies are used as the polymer matrix for construction of wind turbine blades. However, concern about their end‐of‐life treatment garners interest to use thermoplastics for increased recyclability. However, the high viscosity of molten thermoplastics inhibits their use in manufacturing wind turbine blades with injection or compression molding. A recently developed, infusible, reactive thermoplastic resin overcomes this technological barrier. Toward verifying that this recyclable resin is suitable for use in wind turbine blades, a dataset of R = 0.1 and R = 10 fatigue data for glass fiber–reinforced acrylic composites is provided and equal fatigue life to industry standard epoxy and unsaturated PE resin systems is demonstrated. Specifically, R = 0.1 fatigue data for acrylic composites at room temperature and −30 °C for verification of low‐temperature performance are tabulated. To elucidate failure mechanisms, in situ mechanical testing with X‐ray computed tomography demonstrates that damage accumulation occurs by crack propagation along the fiber–matrix interface under cyclic loading. Infrared (IR) thermography predicts failure points in composites specimens with porosity defects introduced from nonideal manufacturing processes. Furthermore, these manufacturing defects are shown to compromise the fatigue life of the acrylic laminates by an order of magnitude.

Zitieren

APA

Cousins, D. S., Arwood, Z., Young, S., Hinkle, B., Snowberg, D., Penumadu, D., & Stebner, A. P. (2023). Infusible Thermoplastic Composites for Wind Turbine Blade Manufacturing: Fatigue Life of Thermoplastic Laminates under Ambient and Low‐Temperature Conditions. Advanced Engineering Materials, 25(11). https://doi.org/10.1002/adem.202201941

Vancouver

Cousins DS, Arwood Z, Young S, Hinkle B, Snowberg D, Penumadu D, et al. Infusible Thermoplastic Composites for Wind Turbine Blade Manufacturing: Fatigue Life of Thermoplastic Laminates under Ambient and Low‐Temperature Conditions. Advanced Engineering Materials. 2023;25(11). doi:10.1002/adem.202201941

BibTeX
@article{Cousins2023,
  author = {Cousins, Dylan S. and Arwood, Zach and Young, Stephen and Hinkle, Brandon and Snowberg, David and Penumadu, Dayakar and Stebner, Aaron P.},
  title = {Infusible Thermoplastic Composites for Wind Turbine Blade Manufacturing: Fatigue Life of Thermoplastic Laminates under Ambient and Low‐Temperature Conditions},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {11},
  doi = {10.1002/adem.202201941}
}
Kostenlos starten →