EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wind Turbine Blade Material Behavior in Abrasive Wear Conditions

Cristian Muntenita iD, Larisa Titire iD, Mariana Chivu, Geanina Podaru, Romeo Marin

Polymers · 13.12.2024 · 16 (24) · 3483

DOI: 10.3390/polym16243483 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.12.2024. Verfasst von Cristian Muntenita und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering, "Dunărea de Jos" University, 800008 Galati, Romania. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: "Dunarea de Jos" University, “Dunarea de Jos” University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The wind turbine blades are exposed, during functioning, to the abrasive wear generated by the impact with air-borne sand particles. In this work, samples of a commercial wind turbine blade, made of a multi-layered composite material, are subjected to abrasive wear tests, using an air streamed wearing particles test rig. Following the analysis of the tests’ results was found that the only protection against failure of the blade by abrasive damage is the surface layer. After its’ penetration, the layers below are quickly destroyed, leading to the blade destruction. The investigation of the main abrasive wear influencing factors—particles’ speed and acting time, showed that the particles’ speed is the most important. To prove that an artificial neural network-based model was used. Also, a method for improvement of the blade resistance to abrasive wear is proposed, consisting of applying on the blade’s surface of a polymeric foil. This offers supplementary protection of the surface layer, delaying its degradation. The tests performed on the protected samples prove the validity of the proposed method. Overall, the work showed the weakness of the blades’ resistance in case of working in abrasive wear conditions and identified an improving method.

Schlagwörter

Stichwörter der Autor:innen

abrasive wearpolymeric composite materialwind turbine blade

Autor:innen und Institutionen

  • Faculty of Engineering, "Dunărea de Jos" University, 800008 Galati, Romania.
  • Faculty of Entrepreneurship, Engineering and Business Management, National University of Science and Technology Politehnica, 060042 Bucharest, Romania.

ORCID-Profile: Cristian Muntenita, Larisa Titire

Förderung

  • "Dunarea de Jos" University
  • “Dunarea de Jos” University

Zitieren

APA

Muntenita, C., Titire, L., Chivu, M., Podaru, G., & Marin, R. (2024). Wind Turbine Blade Material Behavior in Abrasive Wear Conditions. Polymers, 16(24), 3483. https://doi.org/10.3390/polym16243483

Vancouver

Muntenita C, Titire L, Chivu M, Podaru G, Marin R. Wind Turbine Blade Material Behavior in Abrasive Wear Conditions. Polymers. 2024;16(24):3483. doi:10.3390/polym16243483

BibTeX
@article{Muntenita2024,
  author = {Muntenita, Cristian and Titire, Larisa and Chivu, Mariana and Podaru, Geanina and Marin, Romeo},
  title = {Wind Turbine Blade Material Behavior in Abrasive Wear Conditions},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {24},
  pages = {3483},
  doi = {10.3390/polym16243483}
}
Kostenlos starten →