EUVIMEDEUVIMED entdecken
Crossref

Effect of Zn Addition on the Microstructural Heterogeneity and Mechanical Properties of Vacuum‐Assisted High‐Pressure Die Casting Al–Si–Mg–Cu alloys

Yuanhang Jiang, Huiting Zheng, Fei Liu, Haidong Zhao

Advanced Engineering Materials · 2023-05 · 25 (9)

DOI: 10.1002/adem.202201457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 22.02.2023. Verfasst von Yuanhang Jiang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Natural Science Foundation of Guangdong Province, National Natural Science Foundation of China, Guangdong Provincial Applied Science and Technology Research and Development Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Herein, Al – 8Si – 0.5Mn – 0.5 Mg – 0.2Cu – x Zn alloys ( x = 0, 1, 2, and 3 wt%) are produced by a vacuum‐assisted high‐pressure die casting process. The effects of Zn addition on the surface layer thickness and segregation band, the number density of externally solidified crystals (ESCs), and mechanical properties of the alloys are systemically investigated. As the Zn content increases, the size and number density of the ESCs increase. The morphology and size of the eutectic Si phase could be modified by the addition of Zn. In addition, the microstructural heterogeneity indicates that the thickness of the surface layer and segregation band zone increase with increasing Zn content. Proper Zn addition can effectively promote the improvement of strength and elongation in the as‐cast state. When the Zn content is 2 wt%, the yield strength, ultimate tensile strength, and elongation of the alloy are 167, 311 MPa, and 10.8%, respectively.

Förderung

  • Natural Science Foundation of Guangdong Province
  • National Natural Science Foundation of China
  • Guangdong Provincial Applied Science and Technology Research and Development Program

Zitieren

APA

Jiang, Y., Zheng, H., Liu, F., & Zhao, H. (2023). Effect of Zn Addition on the Microstructural Heterogeneity and Mechanical Properties of Vacuum‐Assisted High‐Pressure Die Casting Al–Si–Mg–Cu alloys. Advanced Engineering Materials, 25(9). https://doi.org/10.1002/adem.202201457

Vancouver

Jiang Y, Zheng H, Liu F, Zhao H. Effect of Zn Addition on the Microstructural Heterogeneity and Mechanical Properties of Vacuum‐Assisted High‐Pressure Die Casting Al–Si–Mg–Cu alloys. Advanced Engineering Materials. 2023;25(9). doi:10.1002/adem.202201457

BibTeX
@article{Jiang2023,
  author = {Jiang, Yuanhang and Zheng, Huiting and Liu, Fei and Zhao, Haidong},
  title = {Effect of Zn Addition on the Microstructural Heterogeneity and Mechanical Properties of Vacuum‐Assisted High‐Pressure Die Casting Al–Si–Mg–Cu alloys},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {9},
  doi = {10.1002/adem.202201457}
}
Kostenlos starten →