3D Printing of Soft Magnetoactive Devices with Thiol‐Click Photopolymer Composites
Advanced Engineering Materials · 2023-04 · 25 (7)
DOI: 10.1002/adem.202200749 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 02.08.2022. Verfasst von Elisabeth Rossegger und 5 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Österreichische Forschungsförderungsgesellschaft.
Abstract (Originalsprache)
Magnetoresponsive polymers have gained increased attention in the design of soft actuators as they can be spatially as well as temporally activated and enable an external noninvasive control of movement. By introducing the magnetoresponsive properties in photocurable resins, one can fabricate personalized and complex structures (via vat photopolymerization 3D printing), whose movement can be conveniently controlled by an external magnetic field. Advancing from acrylate‐based photopolymers, which often suffer from shrinkage stress, low monomer conversion, and oxygen inhibition, the fabrication of magnetoresponsive thiol‐click photopolymers containing Fe 3 O 4 nanoparticles as magnetic fillers is highlighted. The addition of the thiol crosslinker yields soft and flexible polymer composites, whose cure kinetics, viscosity, thermal, and mechanical properties are studied as a function of the thiol and filler content. Although cure rate and final monomer conversion decrease with rising filler concentration, the cure kinetics is reasonably fast at 6 wt%. The short pot life, a result of thiol‐Michael reactions induced by Fe 3 O 4 nanoparticles, and a high thiol content, are overcome by the addition of an appropriate stabilizer. As proof of concept, 3D structures are fabricated by digital light processing (DLP) 3D printing and their magnetically driven movement is demonstrated.
Förderung
- Österreichische Forschungsförderungsgesellschaft
Zitieren
APA
Rossegger, E., Höller, R., Hrbinič, K., Sangermano, M., Griesser, T., & Schlögl, S. (2023). 3D Printing of Soft Magnetoactive Devices with Thiol‐Click Photopolymer Composites. Advanced Engineering Materials, 25(7). https://doi.org/10.1002/adem.202200749
Vancouver
Rossegger E, Höller R, Hrbinič K, Sangermano M, Griesser T, Schlögl S. 3D Printing of Soft Magnetoactive Devices with Thiol‐Click Photopolymer Composites. Advanced Engineering Materials. 2023;25(7). doi:10.1002/adem.202200749
BibTeX
@article{Rossegger2023,
author = {Rossegger, Elisabeth and Höller, Rita and Hrbinič, Katja and Sangermano, Marco and Griesser, Thomas and Schlögl, Sandra},
title = {3D Printing of Soft Magnetoactive Devices with Thiol‐Click Photopolymer Composites},
journal = {Advanced Engineering Materials},
year = {2023},
volume = {25},
number = {7},
doi = {10.1002/adem.202200749}
}
EUVIMED