Modelling Early-Age Thermal Gradients in Mass Concrete Pours
IOSR Journal of Mechanical and Civil Engineering · 2026-09 · 23 (5) · 99-102
DOI: 10.9790/1684-23050199102 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-09. Verfasst von Kola Tanish Venkata Raju.
Abstract (Originalsprache)
A transient heat transfer model has been established to determine thermal cycling and cracking risks in mass concrete dam construction. The model uses finite difference techniques and Python programming to simulate core heating caused by the exothermic hydration reaction of cement. Temperature data was taken from three test blocks of 30cm, 45cm and 60cm that had been cast within the batching plant. Using waterproof DS18B20 sensors, core, middle and surface temperatures were recorded every 15 minutes over a seven day period using an Arduino micro-controller. Maximum temperature differences between core and surface temperatures where greater than the critical cracking point of 20 degree celsius in lifts greater than 45cm (60cm lift recorded a max difference of 23.4 degree celsius). However, thermal insulation on the surface of the blocks reduced the maximum temperature differences by 38%. Thermal stresses were found to be greater than the tensile strength of the concrete in early ages when using lift heights of 1.5m and 3.0m that are representative of real situations. This provides specific lift thickness values and curing guidelines to reduce cracking due to thermal stress.
Zitieren
APA
Raju, K. T. V. (2026). Modelling Early-Age Thermal Gradients in Mass Concrete Pours. IOSR Journal of Mechanical and Civil Engineering, 23(5), 99-102. https://doi.org/10.9790/1684-23050199102
Vancouver
Raju KTV. Modelling Early-Age Thermal Gradients in Mass Concrete Pours. IOSR Journal of Mechanical and Civil Engineering. 2026;23(5):99-102. doi:10.9790/1684-23050199102
BibTeX
@article{Raju2026,
author = {Raju, Kola Tanish Venkata},
title = {Modelling Early-Age Thermal Gradients in Mass Concrete Pours},
journal = {IOSR Journal of Mechanical and Civil Engineering},
year = {2026},
volume = {23},
number = {5},
pages = {99--102},
doi = {10.9790/1684-23050199102}
}
EUVIMED